A+ Chapter 7 Flash Cards

Play Memory | Create Card File | Append to Card File
Title: A+ Chapter 7
Description: A+ Chapter 7
Number of Cards: 20
Save Count: 3
Author: ddwakers7
Created: 2002-08-17
Tags: a+cert apluscertification
Private No

Save Count represents the number of people who have saved this card set to their flashcard list. Consider this an endorsement!

    • Question
    • Answer
    • Side 3
    • What is the step in the EP print process that uses a laser to discharge selected areas of the photosensitive drum, thus forming an image on the drum?
    • Writing. The writing step uses a laser to discharge selected areas of the photosensitive drum, thus forming an image on the drum.
    • Any printer that uses the electrophotographic process contains how many standard assemblies?
    • Eight.There are eight standard assemblies in an eletrophotographic process printer.
    • If the static-eliminator strip is absent(or broken) in either an EP process or HP LaserJet laser printer, what will happen?
    • Paper jams may occur in both types of printers, but HP LaserJet printers will flash a "-671 error" message.
    • Which laser component formats the print job for the type of printer being used?
    • Printer controller assembly.
    • What is the most basic printer type?
    • Impact printer.Of the types listed:(bubble,laser,interfaces and print media.
    • LED page printers differ from EP process laser printers in which step?
    • Writing. They use a different process to write the image on the EP drum.
    • Which voltage is used to transfer the toner to the paper in an EP process laser printer?
    • +600Vdc. Because the toner on the drum has a slight negative charge (-100Vdc), it requires a postitive charge to transfer it to the paper.
    • The basis weight is the weight in pounds of 500 sheets of what size of paper?
    • 17 by 221/2 inch.
    • What is the correct order of the steps in the EP print process?
    • Cleaning, charging, writing, developing,transferring, fusing.
    • Which of the following is not a advantage of the daisy-wheel printer?
    • Speed.
    • These particular printers are referred to as page printer because they receive their print job instructions one page at a time.
    • Laser
    • What part of both EP process and HP LaserJet process printers supplies the voltages for the charge and transfer corona assemblies?
    • High-voltage power supply(HVPS).
    • Which printer contains a wheel that looks like a petal with raised letters and symbols on each petal?
    • Daisy-wheel printer.
    • The printer part gets the toner from the photosensitive drum onto the paper.
    • Corona assembly. The corona assembly gets the toner from the photosensitive drum onto the paper. For some printers, this is a corona wire, and for others, it is a corona roller.
    • Which of the following are page description languages?(page description language(PDL),PostScript,PageScript,Printer Control Language(PCL)
    • PostScript and Printer Control Language(PCL).
    • What types of printers can be used with multipart forms?
    • Dot-matrix printers.
    • With EP process laser printers, laser discharges the charged photosensitive drum to___Vdc.
    • -100Vdc.
    • What are possible interfaces for printer?
    • Parallel,Serial,Network. Printers can communicate via parallel,serial and network connection.
    • Which impact printer has a printhead that contains a row of pins that are triggered in patterns that form letters and numbers as the printhead moves across the paper?
    • Dot-matrix printer.
    • What are some advantages of a Universal Serial Bus printer interface?
    • It has a higher transfer rate than a serial connection.(2)It has a higher transfer rate than a parallel connection.(3)It automatically recognizes ne devices.