• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
Front

How to study your flashcards.

Right/Left arrow keys: Navigate between flashcards.right arrow keyleft arrow key

Up/Down arrow keys: Flip the card between the front and back.down keyup key

H key: Show hint (3rd side).h key

image

PLAY BUTTON

image

PLAY BUTTON

image

Progress

1/10

Click to flip

10 Cards in this Set

  • Front
  • Back
  • 3rd side (hint)
System resource types used by hardware and software include
Input/output addresses and memory addresses.
p4
Interrupt request numbers Refer to
bus lines on which voltage is placed for sending a signal to the central processing unit, telling the CPU that a device has a request that needs processing.
p8
Memory addresses are assigned to both
ROM and RAM so that the CPU can access that memory.
p11
Input/output addresses
Are numbers that the CPU can use to access hardware devices, in much the same way it uses memory addresses to access physical memory.
p15
Direct memory access channels
Allow an input/output device to send data directly to memory , bypassing the CPU.
P16
At start-up, a hardware device is assigned
A DMA channel to speed up sending data to memory
p17
A software interrupt
Requires the CPU to get instructions from memory in order to send an I/O address to the hard drive
p18
Configuration data stored in the complementary metal-oxide semiconductor chip is changed by
accessing the setup program stored in ROM BIOS.
p21
As a method to protect data,
The user should keep a backup disk of setup information and a rescue disk of the operating system.
p26
An electrostatic discharge
Can build up on the surface of a nongrounded conductor and nonconductive surfaces such as chothing or plastic.
p31