• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
Front

How to study your flashcards.

Right/Left arrow keys: Navigate between flashcards.right arrow keyleft arrow key

Up/Down arrow keys: Flip the card between the front and back.down keyup key

H key: Show hint (3rd side).h key

image

PLAY BUTTON

image

PLAY BUTTON

image

Progress

1/38

Click to flip

Card Range To Study

through

38 Cards in this Set

  • Front
  • Back
a - cutting edge
b - body of blade
c - shenk
d - handle
17/23 explorer
a - 17 end
b - 23 end
Amalgam carrier
Cement spatula
PFI plastic filling instrument
Amalgam condensors
Spoon excavator
Discoid end of CD amalgam carver
Cleoid end of CD amalgam carver
barnisher
burnisher
BPI base placement instrument
BPI base placement instrument
toffelmire Matrix retainer
Interproximal Carver
CVL7
Hollenback carver (NU) CVHL 1/2
A - contra angle head
B - electric motor
C - red stripe meaning friction grip
A - Shenk
B - neck
C - head
A - shenk
B - neck
C - head
A - round
B - inverted cone
C - straight ifssure
D - tapered fissure
E - Pear
Rubber dam frame
Rubber dam Clamp or Retainer
Rubber dam forceps
A - bow
B - hole
C - jaw
D - prong
What are the 2 types of chisels?
Hoes and angle forming chisels
What is the difference between a hoe and a angle forming chisel?
The angle of blade to shank is >90degrees for a hoe, the Angle forming chisel's cutting edge is NOT perpendicular to the body
What are the 3 numbers of the formula on a NON-ROTARY cutting instrument?
Number 1 - width of blade in 10ths of mm
Number 2 - Length of blade in mm
Number 3 - angle of blade to handle in DEGREES CENTIGRADE
what does this number mean? where owuld it be found?

12-8-16
1.2 mm width of blade
8 mm length of blade
16 degrees centigrade blade to handle
What are the 4 numbers of the formula on a non-rotary cutting insturment/
1st number - width of cutting edge (10ths of mm)
2nd - angle of cutting edge to HANDLE when cutting edge is NOT 25 (90degrees) to blade
3rd - length of blade (mm)
4th - angle of blade to handle
In common terminology, what are the 2 types of rotary handpieces?
Conventional (slow speed)
or
High speed (high and ultra)
What does the color of stripe indicate on a rotary handpiece?
Type of contra-angle head, Blue is a latch, red is a friction grip
What are the sizes of a round bur?
1/4, 1/2, 2, 4, 6, 8
What are the sizes of a Inverted cone bur?
33.5, 34,35,36,37,38,39
What are the sizes of a straight fissure?
555,556,557,558 for having crosscut blades
55,56,57,58 for plain
1555,1556,1557,1558 for having crosscut +round head
1155,1156,1157,1158 for having plain + round head
What are sizes of a tapered fissure?
w/ cross cut: 699 - 703
Plain: 169-172
w/ round nose - 271 and 272
What are sizes of a pear shaped bur?
331, 330 and 245
Which bur is used for caries excavation on slow speed?
ROUND larger
Sizes of a multifluted bur?
7002, 7004, 7303, 7901, 7802