• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
Front

How to study your flashcards.

Right/Left arrow keys: Navigate between flashcards.right arrow keyleft arrow key

Up/Down arrow keys: Flip the card between the front and back.down keyup key

H key: Show hint (3rd side).h key

image

PLAY BUTTON

image

PLAY BUTTON

image

Progress

1/8

Click to flip

8 Cards in this Set

  • Front
  • Back
What are the four basic components to a solar hot water system
Collector, storage tank, circulation system, booster unit.
What are the different types of heat transfer?
Radiation (electomagnetic radiation - photons)
Convection (eg. fluid)
Conduction (electron diffusion or phonon vibrations)
Reflection (dispersion)
What are the points of heat loss in a solar collector
Reflection of glass (3-4%)
Reflection of copper plate (3%)
Radiation off glass (3%)
Radiation off copper
What is Newtons law of cooling?
The rate of heat loss of a body is proportional to the difference in temperatures between the body and its surroundings, or environment.
What is the purpose of douple glazing a collector and when is it most beneficial?
double glazing reduced heat loss by convection, conduction and re-radiation. i.e. it reducing the effect of Newtons law of cooling.
What are some problems with natural thermosiphon?
The force of natural thermosiphon is not very strong therefor a bend in the pipe that drops below the line of the pipe can cause air bubbles (if in the system) to block at the bend. The tank must be above the collector and not too far away.
What are the three different configurations of collectors relative to storage tanks?
Close coupled, thermosiphon system
Remote storage, theremosiphon system
Split system or forced circulation systems.
How does circulation occur in close coupled thermosihon systems?
Hot water is less dense than cold water so it rises. The rate of flow is proportional to the rate of solar radiation on the panel.Circulation will occur when there is a temp differential between water in the tank and water in the collector.