- Shuffle
Toggle OnToggle Off
- Alphabetize
Toggle OnToggle Off
- Front First
Toggle OnToggle Off
- Both Sides
Toggle OnToggle Off
Front
How to study your flashcards.
Right/Left arrow keys: Navigate between flashcards.right arrow keyleft arrow key
Up/Down arrow keys: Flip the card between the front and back.down keyup key
H key: Show hint (3rd side).h key
PLAY BUTTON
PLAY BUTTON
36 Cards in this Set
- Front
- Back
|
When sound comes from all around, with no definable point source or sense of space it is called....
|
Envelopment
|
|
When sound comes from a spot and the sounds are distinguishable with a sense of position it is called...
|
Localization
|
|
For SMPTE/ITU speaker placement, the L/R speaker are at....
|
30 degrees
|
|
For SMPTE/ITU speaker placement, the Ls/Rs speakers are at
|
110 degrees
|
|
SMPTE/ITU speaker placement has good _________ in front and good _______ in surrounds.
|
Localization, envelopment
|
|
P&E Wing Speaker placement has the L/R speakers placed at...
|
30 degrees
|
|
P&E Wing Speaker placement has the Ls/Rs placed at...
|
110-150 degrees
|
|
For optimum P&E Wing Speaker placement, the Ls/Rs are placed....
|
135-150 degrees
|
|
P&E Wing Speaker placement gas good localization in.....
|
the front and rear
|
|
Bass management redirects the low end of surrounds to the....
|
sub
|
|
For bass management, the low end is summed with the....
|
LFE
|
|
LFE serves as the...
|
production channel
|
|
In bass management, the sub is the ...
|
playback device
|
|
Down mixing is....
|
reducing surround to stereo or mono
|
|
Automatic downmixing is done by
|
decoder, using metadata
|
|
Manual downmixing creates a....
|
separate stereo mix
|
|
The channel assignment for film is...
|
L C R Ls Rs LFE
|
|
The channel assignment for SMPTE/ITU is...
|
L R C LFE Ls Rs
|
|
What kind of channel assignment does Pro Tools use?
|
SMPTE/ITU
|
|
The channel assignment for DTS is..
|
L R Ls Rs C LFE
|
|
TDM surround has mulitchannel ________, ________, __________, and ___________.
|
Tracks (inputs), outputs, buses, inserts
|
|
For position pan controls, the front knob pans between...
|
L, C, R
|
|
For position pan controls, the rear knob pans between...
|
Ls and Rs
|
|
For position pan controls, the F/R knob pans between
|
LCR and Ls/Rs
|
|
The time it takes to glide from one automation value to another in auto glide mode is called..
|
Auto-glide time
|
|
The amount of bleed into neighboring channels is called...
|
Divergence
|
|
When Divergence=100, there is
|
no bleed (point source)
|
|
When Divergence=0, it is the
|
widest spread
|
|
The two types of Center Percentage are
|
discrete center and phantom center
|
|
Center %=100 means
|
discrete center
|
|
Center %=0 means...
|
Phantom center
|
|
This slider send the current track to the LFE path
|
LFE slider
|
|
Showing green on the meter in Pro Tools means..
|
nominal
|
|
A yellow meter in Pro Tools means
|
-6 dBFS
|
|
You can set meter options to be pre or post fader, but they are always post....
|
insert
|
|
For wide meter view, how do you click on a meter?
|
ctrl+option+command click
|
