Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
28 Cards in this Set
- Front
- Back
guards on a bench grinder should cover?
|
d.) 2/3 of the wheel |
|
the gap between the tool rest and the grindstone should never be more than?
|
b.) 3mm or 1/8 in
|
|
a grinding wheel is classified by?
|
a.) the size and type of abrasive and the type of bonding agent
|
|
a safety specification to consider when selecting a grinding stone or disc is?
|
c.) the rpm rating of the stone or disc
|
|
a dressing tool is used for?
|
b.) refacing the surface of grindstones |
|
bouncing or heavy vibration of the workplace when grinding are indications that the grindstone is?
|
c.) out of round
|
|
before installing the new grindstone, you need to? |
c.) inspect the wheel for cracks
|
|
the flutes of a drill bit?
|
d.) all of the above. -form the cutting edges on the point -allow the chips to escape -cause the chips to curl -permit the cutting oil to reach the cutting edges |
|
the web of a drill bit |
-separates the flutes -is the supporting section section of the bit -gradually increases in thickness throughout its length |
|
the risk of the drill bit grabbing the work or breaking?
|
a.) increases as the bit breaks through the work piece
|
|
a v-block should be used when drilling holes in?
|
a.) round material
|
|
hand drills are rated by the?
|
d.) size of the chuck |
|
tapered shanks are most common on _______ drill bits. |
|
|
slots in the drill press table are provided for? |
c.) clamping jigs to the table |
|
a magnetic base drill press is an advantage when? |
c.) holes are drilled in the vertical plane |
|
forming steel plate into cylinders is a process known as?
|
d.) rolling
|
|
the main reason for using templates when forming steel is to? |
a.) maintain accuracy
|
|
before using a power brake, it is good practice to? |
c.) confirm the machine settings |
|
the power tool that is best suited for creating intricate shapes and multiple bends is the? |
b.) power bender |
|
trip hammers are good for? |
a.) sharpening bucket teeth |
|
what two factors must be considered when setting the blade clearance on a power shear? |
c.) material type and thickness |
|
one advantage of the vertical band saw is that it? |
b.) can be used to cut curves |
|
when cutting with a horizontal band saw, it is possible to? |
-cut several pieces of bar stock at the same time -cut a variety of structural shapes -start the cut and then go work on something else |
|
a notcher is a cutting tool found on?
|
c.) an ironworker |
|
safe cutting of L shape structures in a cut-off saw requires? |
b.) one vertical leg of the L shape against the stationary block of the clamping device |
|
power positioners range in size from small tap top versions to large industrial versions |
a.) true |
|
the shape, size or length of an object being welded on the positioner may require the use of what to help it rotate easily? |
both a.) and c.) - a.) counter weights -c.) pipe-stands |
|
what processes can a power positioner be used with?
|
-manual -semi-automatic -automatic |