Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
194 Cards in this Set
- Front
- Back
- 3rd side (hint)
The MK-GRUEA-7 seat provides crewmembers with completely automatic escape at ground level at what minimum Knots?
|
80 Knots.
|
|
|
How many Martin-Baker MK-GRUEA-7 seats are on the EA-6B?
|
4
|
|
|
What difference, if any, do the MK-GRUEA-7 ejection seats have from each other?
|
Seat color
|
|
|
what component provides an automatic backup mode of separating the parachute from the crewmembers?
|
SEAWARS
|
|
|
What type of aircraft uses the Martin-Baker MK-GRUEA-7?
|
EA-6B
|
|
|
Which of the following seats ejects first during ejection?
|
ECMO #3
|
|
|
What color is the murphy-proof bracket for the ECMO#2 Seat?
|
Orange
|
|
|
Who is the primary person to initiate ejection?
|
Pilot
|
|
|
With the CMD EJECT SELECT handle in the NORM position, what individual(s) is/are able to initiate ejection?
|
Pilot and ECMO #1
|
|
|
The Lanyards for the ejectionseat safety pins are what color?
|
RED
|
|
|
Prior to entering an aircraft cockpit that has an ejection seat, personnel should ensure which of the following guidelines is met?
|
1.Safety Pins are installed.
2.Proper Safety precautions are Followed |
|
|
Who may work on ejection seats?
|
Qualified personnel ONLY!!!
|
|
|
How many tubes are attached to the center body of the rocket motor?
|
TEN
|
|
|
what precautions, if any, are used to ensure the correct rocket motor is installed on the proper seat?
|
Varied size BOLTS.
|
|
|
The Rocket Motor Initiator has how many Compartments?
|
TWO
|
|
|
What is the main structural frame on the MK-GRUEA-7 ejection Seat?
|
Main beam assembly
|
|
|
What component secures the seat in the aircraft?
|
Top latch mechanism
|
|
|
The time release Mechanism provides auto-matic harness release separation at what altitude range?
|
11,500 To 14,500 feet.
|
|
|
what component provides visual indication of a properly installed MK-GRUEA-7 ejection seat?
|
Time-Release Mechanism
|
|
|
The SEAWARS is designed to release the prarchute from the crewmember during sea water entry within how many seconds?
|
2
|
|
|
Which of the following is NOT a main assembly of the NACES?
|
Rocket Motor Assembly
|
Main Beam
Catapult assembly Parachute assembly Rocket Motor assembly |
|
What component secures the NACES to the Aircraft?
|
Catapult assembly
|
|
|
Smooth movement of the seat bucket is provided by what component.
|
Seat bucket slippers
|
|
|
What component takes the full thrust of the catapult during ejection?
|
Top Cross-Beam
|
|
|
The seat structure is secured to the catapult by what component?
|
Top Latch Assembly
|
|
|
The drogue deployment catapult is mounted at what location?
|
Outboard of the RH Main Beam.
|
|
|
What controls the firing of the drogue catapult?
|
Electronic sequencer
|
|
|
what is the diameter of the drogue chute
|
57"
|
|
|
The PDRM is mounted at what location?
|
Left side of the main beam
|
|
|
Which of the following is NOT a component of the electronic sequencing system?
|
Two Thermal Couples
|
2 thermal couples
2 thermal batteries 2 pitot assmeblies 2 sequencer start switches |
|
The sequencer controls which of the following ejection events?
|
Man/seat separation
|
|
|
What component(s) supplies/y gas pressure to operate the underseat rocket motor?
|
Multy purpose initiator
|
|
|
What component ensures the seat occupant is correctly positioned and locked in for ejection?
|
Shoulder harness reel
|
|
|
Due to aircraft installation requirements, what different characteristics, if any, do the SJU-17(V)1/a, 2/a and 9/a seat buckets have compared to the SJU-17(V)3/a thru 6/a assemblies?
|
1 inch wider
|
|
|
The underseat rocket motor has which of the following differences in features to prevent incorrect installation between forward and aft seats on the F-18 Aircraft?
|
Mounting bolt size
|
|
|
The safe arm handle shows what color when in the Armed position?
|
yellow and black
|
|
|
what difference, if any, do the canopy penetrators on the forward seats have between the aft seats?
|
Length
|
|
|
How many different NACES seat bucket survival kit variationsa are there?
|
Three
|
|
|
The Emergency oxygen system is automatically activated during ejectionby what component or event?
|
Extension of a lanyard
|
|
|
what color are the manual deployment handles on the survival kit?
|
Yellow
|
|
|
when the ejection control handle is pulled, the sears are withdrawn from the seat initiator firing mechanisms followed by what event?
|
TWO (2) Impulse cartridges are fired
|
|
|
During ejection, What component withdraws a piston from engagement in the lower operating link of the
Emergency Restraint Release Mechanism? |
RH Cartridge
|
|
|
During Ejection, what feature provides an even increase in gas pressure to eliminate excessive g-forces?
|
Staggered firing of the catapult cartridges
|
|
|
During ejection, once the leg restraint lines are freed from the aircraft, what component or condition restrains the remaining lines, preventing forward movement of the legs?
|
Snubbers
|
|
|
During ejection, sequencer timing commences during what condition?
|
Closure of the start switches
|
|
|
When ejecting in Mode 3 between 500-600 keas, at what time interval does the sequencer fire the drogue deployment catapult?
|
0.22 seconds
|
|
|
When ejecting in Mode 1 between 0-300 keas, at what time interval does the sequencer fire the barostatic release unit cartridge and release harness locks?
|
0.65 seconds
|
|
|
When the ejection seat is fired, two onboard thermal batteries are immediatley energized, supplying usable electrical power to the sequencer within what time frame?
|
0.27 milliseconds
|
|
|
At approximately what distance of seat travel are the two pyrotechnic cartridges actuated?
|
42 inches
|
|
|
To Maintain a uniform vertical acceleration profile on the seat and occupant, what component begins to operate just as the seat separates from the catapult
|
Underseat Rocket Motor
|
|
|
On the F-14 aircraft, what force provides normal opening and closing of the canopy?
|
Pneumatic
|
|
|
The external serviced reservoirs that supply power for the different modes of canopy operation contain what type of pressure?
|
Pneumatic
|
|
|
How many acrylic panels make up the F-14 canopy
|
2
|
|
|
What locks the canopy in the closed position?
|
Locking Hooks
|
|
|
What component actuallyopens and closes the canopy?
|
Hydraulic Actuator
|
|
|
What is the function of the lock actuator restrictor?
|
To Regulate the speed during locking and unlocking of the canopy.
|
|
|
The canopy pneumatic control module contains how many pressure reducers?
|
two
|
|
|
The canopy pneumatic reservoir is serviced to what maximum pressure?
|
3,000psi.
|
|
|
what is the total cubic inch capacity of the canopy pneumatic reservoir?
|
225 cubic inches
|
|
|
The reservoir relief valve opens at what minimum pressure?
|
4,500psi.
|
|
|
The auxiliary pneumatic reservoir is serviced to what maximum pressure?
|
3,000psi.
|
|
|
What component reduces pneumatic pressure to the auxiliary unlock pneumatic release valve?
|
Auxiliary pressure reducer.
|
|
|
How many ports are there on the unlock shuttle valve?
|
Three.
|
|
|
What component prevents nitrogen from venting overboard?
|
Lock actuator check valve
|
|
|
How many control handles are there for use in canopy operation?
|
three
|
|
|
Which of the following is NOT a method of canopy operation.
|
Emergency Mode
|
Emergency Mode
Holding Mode Boost Closing Mode Normal Opening Mode |
|
During normal opening mode, the shutoff valves in the open and close modules are vented to atmosphere through what port of the actuator?
|
C5
|
C5
C2 C3 C4 |
|
During Normal opening mode, nitrogen on the opposite side of the piston is vented overboard through what valve of the control module?
|
No. 4
|
|
|
During the BOOST closing mode, valve No.4 in the control module is positioned to dirct what maximum pressure through the C2 Port?
|
790psi.
|
|
|
After 3 minutes in BOOST closing mode, the nitrogen pressure will decrease to what minimum pressure on a system serviced to 3,000psi?
|
600psi.
|
|
|
When should you use the auxiliary opening mode to unlock the canopy?
|
Pneumatic system pressure drops below 225psi.
|
|
|
What air source is used to inflate the canopy seal system?
|
Cooled engine bleed air.
|
|
|
Where is the canopy seal pressure regulator located?
|
on the Turtledeck
|
|
|
The canopy pressure seal receives cooled engine bleed air at approximately what pressure?
|
80psi.
|
|
|
How many types of pyrotechnic cords are used in the F-14 canopy emergency jettison system?
|
Three
|
|
|
The Term XSMDC stands for what type of pyrotechnic cord?
|
Expanding shielded mild detonating cord.
|
|
|
What component prevents the explosive signal provided by the canopy jettison initiator from entering the SMDC lines of the seat ejection system?
|
One-way explosive transfer
|
|
|
The S-3 Frangible escape system uses what type of explosives instead of hot gas?
|
SMDC
|
|
|
Instead of safety pins, the external jettison handle uses what item to protect from inadvertent firing.
|
10 Foot lanyard
|
|
|
The window-severance explosive charge is actuated by what crewmember(S)'s initiator.
|
Pilot OR Co-Pilot
|
|
|
Why is an SMDC explosive system more favorable than a hot gas system?
|
More reliable
|
|
|
Which of the following was a factor in the ordnance mishap onboard the USS ORISKANY?
|
Lack of training
|
Faulty Ordnance
Faulty Maintenance Lack of Training Fatigue |
|
What instruction governs the Qual/Cert Program?
|
OPNAVINST 8020
|
|
|
What term refers to the physcial act of transporting or moving explosives/esplosive devices afloat or ashore?
|
Storage/Stowage
|
|
|
Which of the following individuals my NOT sign as board of chairman on the ordnance certificatoin form.
|
Division Officer
|
|
|
Which of the following is required on the ordnance certification form when an individual certification is revoked?
|
Diagonal red line on Qual/Cert form
|
|
|
The Qual/Cert program is NOT applicable to which of the following personnel?
|
Security Force
|
|
|
What is required when an explosive mishap is caused by an individual's failure to follow authorized procedures?
|
Page 13 record entry.
|
|
|
Qual/Cert is valid for how many years?
|
1
|
|
|
In the Qual/Cert program, which of the following individuals must the CO Certify in writing?
|
Certification board members.
|
|
|
The Qual/Cert board consists of which of the following individuals?
|
Quality Assurance representative.
|
|
|
If Seniority requirements cannot be met on the Qual/Cert board within a command, what activity may grant a waiver.
|
NAVAIR
|
|
|
Which of the following systems does NOT get its air from an auxiliary bleed air system?
|
Liquid Oxygen
|
|
|
A Bleed air system can reach up to what temperature?
|
400F
|
|
|
An S-3 Aircraft bleed air leak detection system consists of how many loops?
|
4
|
|
|
The sensing elements for a bleed air leak detection system are mounted between ducts and the aircraft structure for what reason
|
The bleed air Temp is High
|
|
|
In a bleed air leak detection system, what causes a chemical reaction in the sensing element?
|
Heat
|
|
|
An S-3 bleed air leak detection system is powered by what bus?
|
Essential ac
|
|
|
During a test of an S-3 bleed air leak detection system, a ground circuit is completed to turn on which of the following lights?
|
2 BL Leak
|
|
|
Which of the following is NOT a component of a bleed air leak detectionsystem.
|
Flow Valves
|
Leak Detector Control
Sensing Elements Flow Valves Enging Start Port Leak Detector |
|
Bleed air sensing elements are mounted within what distance of ducts.
|
2-5 inches
|
|
|
The engine start port leak detector completes a ground circuit in excess of what temperature?
|
225F
|
|
|
What type of ice on aircraft surfaces is smooth and hard to detect visually.
|
Glazed
|
|
|
Frost is a result of which of the following factors?
|
Water vapor is turned into a solid.
|
|
|
What system is designed to remove ice after it has formed?
|
Deice boot system
|
|
|
A P-3 aircraft gets its air source for anti-icing from what stage of an engine compressor?
|
14th stage
|
|
|
A P-3 aircraft ice detector warning light is located where?
|
Center instrument panel
|
|
|
The shutoff valve for a wing deice system has an indicator to show valve position. Where is this indicator located.
|
On top of the valve housing.
|
|
|
What component controls the valve opening for an anti-ice modulating valve?
|
Thermostat
|
|
|
The Thermostats in the outboard leading edge plenum areas are set at what temperature?
|
145F
|
|
|
The wing inboard and center section thermostat are set at what temperature?
|
120F
|
|
|
The airfoil temperature sensor amplifier is powered by what component?
|
LE HOT
|
|
|
High Temperature within the leading edge is generally caused by which of the following conditions?
|
Faulty modulator valve
|
|
|
Which of the following positions is NOT a selection for the ice protection panel rotary switch?
|
WING
|
|
|
The OPEN light on the ice protection panel illuminates when what condition occurs?
|
Bleed air valve opens
|
|
|
The fuselage bleed air shutoff valves are normally in what position during normal deicing operation?
|
Closed
|
|
|
When performing a leak test on the anti-ice system, the time delay will illuminate the ACCEPT light after how many seconds?
|
8 seconds
|
|
|
The warm air temperature control valve for a windshield anti-ice system is modulated by what type of force?
|
Muscle.
|
|
|
The Flow/Temperature limiting anti-ice valve is what type of valve?
|
Dual Function
|
|
|
The warm air over temperature sensor opens if duct temperature reaches what temperature, ±25°F?
|
375°F
|
|
|
The windshield overheat temperature sensor closes when airflow drops to what temperature?
|
280°F±5
|
|
|
The windshield anti-ice/rain removal switch has how many positions?
|
Three
|
|
|
An EA-6B aircraft windshield washing system uses what percentage of methyl alcohol?
|
50%
|
|
|
The EA-6B windshield washing system has how many nozzles?
|
5
|
|
|
What component is NOT a part of the windshield washing shutoff valve?
|
Temperature solenoid
|
|
|
When the Windshield washing shutoff valve is energized, how much air pressure is regulated to the windshield washing tank?
|
10 ±1 psig
|
|
|
The windshield switch is what type of switch
|
single-pole, three position
|
|
|
Holding the WINDSHIELD switch to WASH routes what amount of voltage to open the Shutoff valve?
|
28 Vdc
|
|
|
The anti-g internal relief valve maintains what maximum pressure?
|
11 psi
|
|
|
Pressing the button on top of an anti-g valve performs which of the following functions?
|
Manually operates the anti-g valve.
|
|
|
Where is the vent suit temperature sensor located?
|
Downstream of the vent suit regulating valve.
|
|
|
The vent suit pressure regulating valve limits flow rate to how many cfm?
|
14
|
|
|
The vent suit pressure relief valve begins to open at what pressure?
|
10psi
|
|
|
The vent pressure relief valve is fully open at what pressure?
|
18psi
|
|
|
How is the radar liquid cooling system airflow valve operated?
|
Pneumatically
|
|
|
Which of the following is NOT a characteristic of CF3BR?
|
Toxic
|
Odorless
Tasteless Toxic Non-Corrosive |
|
The ram air scoop for the radar liquid cooling system closes from a signal from what component
|
ADC (Air Data Computer)
|
|
|
The P-3 fire extinguishing container assembly is pressurized with what amount of nitrogen?
|
600psi.
|
|
|
A safety disc plug on the fire extinguisher container has a burst range of what pressure?
|
1450psi-1800psi.
|
|
|
When operating the APU TEST switch, which of the following is an indication that the system is working properly?
|
Horn Sounds
|
|
|
The avionics pressurization filter removes what percentage of particles larger then 10 microns?
|
98%
|
|
|
A waveguide air desiccator turns what color when moisture IS present?
|
PINK
|
|
|
The Missile cold air modulating valve receives electrical signals from what component?
|
Missile controller
|
|
|
A pressure switch on the missile coolant pump opens when the output pressure drops to which of the following pressures?
|
62 psi.
|
|
|
At 18,000 feet, the density of the earth's atmosphere is about what amount compared to that at sea level?
|
one-half
|
|
|
What is the atmospheric pressure at sea level?
|
14.7psi
|
|
|
What is the atmospheric pressure at 60,000 feet?
|
1psi.
|
|
|
At approximately 37,000feet, what is the outside air temperature?
|
-55°C
|
|
|
The lowest outside air temperature that an aircraft can encounter could occur at what height?
|
37,000 feet
|
|
|
An aircraft flying at supersonic speed at an altitude of 35,000 feet may generate what temperature on its skin?
|
200°F
|
|
|
Which of the following is not a heat source that will raise cabin/cockpit temperature
|
Aileron Heat
|
|
|
Experiments have proven that a person can withstand and maintain efficiency for extended periods at what maximum temperature?
|
80°F
|
|
|
How many requirements are there for the successful functioning of a pressurization and air conditioning system?
|
5
|
|
|
On all jet aircraft, the air used for an ECS is taken from what section of the jet engine?
|
Compressor section
|
|
|
The cooling of bleed air before it enters the cabin is provided by what component?
|
Refrigeration unit
|
|
|
The term air-to-air comes from the principle of cooling the air without the use of what component or additive?
|
Refrigerants
|
|
|
A P-3 air-conditioning system is comprised of how many independant air cycle cooling systems?
|
TWO
|
|
|
Which of the following components is a fresh air source for a P-3 ACS
|
AMP
|
|
|
EDCs are what type of compressor units?
|
Single stage
|
|
|
What component is the primary air source for the ACS during static ground operations?
|
AMP
|
|
|
The EDCs are adjusted for maximum power requirement of what horsepower?
|
81hp
|
|
|
The air volume in the APU/AMP divides at what section?
|
ACS interconnection duct
|
|
|
When the APU/AMP is the air supply source, what component is used to balance airflow?
|
Flow-limiting venturi
|
|
|
What component in the ACS removes moisture from the air prior to its entering the cabin?
|
Water Seperator
|
|
|
The flow-limiting venturi is sized to limit airflow to what amount per minute?
|
67 pounds
|
|
|
On a flow-limiting venturi, reverse EDC airflow is prevented by what component?
|
Check valve
|
|
|
Which of the following is NOT a component of a cabin temperature control system?
|
Control temp sensor
|
|
|
The temperature control system selector-incidator has how many sets of dot markings?
|
THREE
|
|
|
Rotating the push-pull knob counterclockwise on the selector-indicator performs what function?
|
Provides cooler air
|
|
|
The temperature controller is composed of what number of modules?
|
four
|
|
|
What component in the temperature controller controls the automatic mode control circuitry?
|
Programming amplifier
|
|
|
The cabin master temperature sensor is at what location?
|
Above pilot
|
|
|
Elimination of EDC Back-pressure is provided by what component?
|
Pressure ratio limiter
|
|
|
The pressure ratio limiter is intended to function at what altitude?
|
Above 18,000 feet
|
|
|
In order for aircrew personnel to operate at the same level of efficiency as at sea level, what solution was developed?
|
Pressurizing the cockpit/cabin area.
|
|
|
The area of an aircraft that is pressurized must be free from which of the following things?
|
Air leaks
|
|
|
The S-3 Pressurization system regulates what type of air to control cabin pressure?
|
Outflow
|
|
|
The S-3 Pressurization system consist of how many modes of operation?
|
FIVE
|
|
|
Which of the following is NOT a mode of pressurization operation?
|
Constant
|
|
|
At a flight altitude of 15,000 feet, what is the minimum cabin pressure differential
|
3.94 psi.
|
|
|
At a flight altitude of 25,000 feet, what is the maximum cabin pressure altitude?
|
5,380 feet
|
|
|
At a flight altitude of 40,000 feet, what is the minimum cabin pressure altitude?
|
11,520 feet
|
|
|
During flight operations between 5,000 and 24,000 feet, what mode of operation is in effect?
|
Isobaric
|
|
|
The differential mode of operation overrides the isobaric mode when the aircraft is flying in excess of what altitude?
|
24,000 feet
|
|
|
During the dump mode of operation, the re-circulation valve is actuated to what position?
|
Full Open
|
|
|
The pressurization mode of operation is used for what purpose?
|
When returning from the dump mode.
|
|
|
The S-3 pressurization system will begin to pressurize whenever the ground elevation is above what altitude?
|
5,000 feet
|
|
|
To ensure adequate cooling of the avionics system during ground operation at altitudes above 5,000 feet, which of the following is a step that must be adherred to?
|
Turn AUX VENT selector to ON
|
|
|
How is the cabin pressure regulator valve actuated?
|
Pneumatically
|
|
|
How many ports lead into the pressure regulator valve diaphragm chamber?
|
Three
|
|
|
Which of the following is NOT a position on the cabin pressure regulator control?
|
AUX
|
|
|
The cabin pressure regulator control has how many pneumatic ports?
|
Four
|
|
|
The cabin low-pressure switch closes at what altitude?
|
13,000 (±500) feet
|
|
|
The cabin air pressure sensing filter traps dust particles greater than what minimum diameter?
|
10 microns
|
|