Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
37 Cards in this Set
- Front
- Back
A room equipped with a shower or bathtub is a ________________.
|
Bathroom
|
|
Fixture connections that require the removal of an access panel for servicing are considered ________________.
|
Accessible
|
|
That part of the lowest piping of a drainage system that receives the discharge from soil, waste, and other drainage pipes inside the walls of the building and conveys it to a point 2 feet outside the building wall is a _______________________.
|
Building Drain
|
|
A vertical vent that is a continuation of the drain to which its connects is a __________________________.
|
Continuous Vent
|
|
A horizontal drain that is sized to provide free movement of air above the flow line of the drain is called a __________________________.
|
Combination waste and vent system
|
|
The length along the centerline of the pipe and fittings is the ___________________.
|
Developed Length
|
|
A device integrated within an air accumulator vessel that is designed to discharge a predetermined quantity of water to fixtures for flushing purposes is a (an) ___________________.
|
Flushometer Tank
|
|
The combination of fittings that may be used to make an offset and is considered a vertical pipe are ___________________________.
|
1 - 45 degree and 1- 60 degree
|
|
Water that is safe for people to drink is referred to by this code as ______________________________.
|
Potable Water
|
|
By code definition, a stack is always _____________________.
|
Vertical
|
|
A vent that also serves as a drain is a (an) ______________________.
|
Wet Vent
|
|
A pipe that makes an angle of not more than 45 degrees with the vertical is considered _________________________.
|
Vertical
|
|
The vertical depth of a trap seal is measured from ___________________.
|
The crown weir to the top of the dip of the trap.
|
|
A mixing valve that senses outlet temperature and compensates for the fluctuations in the incoming hot or cold water temperature is a ________________________.
|
Thermostatic (temperature control) valve
|
|
The restroom facilities in a private day care center are classified as public use. T/F
|
True
|
|
The discharge from clinical sinks and conveyed to the building drain is defined as a waste pipe. T/F
|
False
|
|
A combination building sewer is (a) _________________.
|
Building sewer that conveys both sewage and storm water.
|
|
PEX is the definition for ______________________
|
Cross-linked Polyethylene
|
|
The lowest portion of the inside of a horizontal pipe is called the ________________________.
|
Invert
|
|
The part of the horizontal piping of a drainage system that begins _____ feet downstream from the last mobile home site and conveys it to a public sewer is called a mobile home park sewer.
|
2
|
|
A device and system of piping that maintains a water seal in a remote trap is called a trap primer. T/F
|
True
|
|
Static pressure is a pressure existing without any flow. T/F
|
True
|
|
An unconfined space is a room or space having a volume equal to at least ____ of the aggregate input rating of all the fuel-burning appliances in that space.
|
50 cubic feet per 1,000 Btu/hr
|
|
A permanently installed mechanical device, other than an ejector, for removing sewage or liquid wastes from a sump is called a sewage pump. T/F
|
True
|
|
A standard that is an extensive compilation of provisions covering broad subject matter is the definition for ____________________.
|
Code
|
|
The principle artery of the venting system to which branches may be connected is called the _____________________.
|
Main Vent
|
|
A joint obtained by the joining of metal parts with metallic mixtures or alloys that melt at a temperature up to and including 840° F is a __________________________.
|
Soldered Joint
|
|
The organization, office, or individual responsible for enforcing the requirements of a code or standard is the _________________________.
|
Authority Having Jurisdiction
|
|
That portion of a drainage system that does mot drain by gravity into the building sewer is known as a _______________________.
|
Building Subdrain
|
|
A pipe inside a building that conveys storm water from the roof to a storm drain is called a (an) ___________________________.
|
Conductor
|
|
An outlet on a boiler to a permit emptying or discharging of sediment is called a (an) ___________________________.
|
Boiler Blowoff
|
|
A pressure surge-absorbing device operating through the compressibility of air is called a (an) _____________________.
|
Air Chamber
|
|
A device installed in a drainage system to prevent reverse flow is a __________________.
|
Backwater Valve
|
|
Any pressure less than that exerted by atmosphere is a (an) _______________________.
|
Vacuum
|
|
A document, the main text of which contains only the mandatory provisions using the word "shall" to indicate requirements, is best described as a ___________________.
|
Standard
|
|
Unsanitary and insanitary share the same meaning. T/F
|
True
|
|
When a backflow prevention device does not bear a critical level marking, the part of the device that shall constitute the critical level is the ______________________.
|
Bottom
|