Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
20 Cards in this Set
- Front
- Back
What are 2 types of bridges?
|
1. Simple bridge
2. Learning bridge (similar to a layer-2 switch) |
|
What layer to bridges operate at?
|
Data link layer
|
|
What layer do routers operate at?
|
Network layer
|
|
What are the 4 basic types of backbone networks that can be mixed together?
|
1. Routed backbones
2. Bridged backbones 3. Collapsed backbones 4. Virtual LANs |
|
What are the 3 backbone architecture layers?
|
1. Access layer (LAN)
2. Distribution layer (usually within one building) 3. Core layer (building to building) |
|
Routed backbones move packets using...
|
network layer addresses
|
|
Bridged backbones move packets using...
|
data link layer addresses
|
|
What type of topology do routed backbones use?
|
Bus topology
|
|
What type of topology do bridged backbones use?
|
Bus topology
|
|
What type of topology do collapsed backbones use?
|
Star topology
|
|
Rack-based backbones collapse the backbone into a single room called...
|
A main distribution facility (MDF)
|
|
Devices in a main distribution facility are connected using...
|
Patch cables
|
|
What are the 2 basic designs of a virtual LAN?
|
1. Single switch
2. Multi-switch |
|
What 4 ways are computers assigned to individual VLANs in a single switch VLAN?
|
1. Port-based VLANs
2. MAC-based VLANs (advantage when moved) 3. IP-based VLANs (advantage when moved) 4. Application-based VLANs |
|
What is FDDI?
|
Fiber Distributed Data Interface (operates at 100 Mbs)
|
|
What topology does FDDI use?
|
It uses a physical and logical ring topology (self healing rings)
|
|
What 4 ways does ATM differ from Switched Ethernet?
|
1. ATM uses small, fixed-length packets of 53 bytes
2. ATM provides no error correction along the way 3. ATM uses virtual channels instead of fixed addresses 4. ATM prioritizes based on QoS |
|
What are the two types of ATM virtual circuits?
|
1. Permanent virtual circuits (PVCs)
2. Switched virtual circuits (SVCs) (deleted after completed) |
|
What are 2 methods of translating ethernet frames before sending over an ATM network?
|
1. LAN Encapsulation (LANE)
2. Multiprotocol Over ATM (MPOA) |
|
What characteristics would be included in the "ideal" backbone?
|
1. Combined use of layer 2 and layer 3 switches
2. Access layer uses 10/100 layer 2 switches 3. Distribution layer uses layer 2 switches with 10BaseT or Fiber 4. Core layer uses layer 3 switches 5. Redundant switches and cabling |