Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
21 Cards in this Set
- Front
- Back
G54 – G59
G54.1P1 – P48 |
- Coordinate Systems
|
|
G110X_Y_
|
- Safe Machine Move. Includes fixture avoidance.
|
|
G170
|
- Spot-face/Drill-Only with full-size drill.
|
|
M00
|
- Program Stop
|
|
M06T(1-50)S1 or 2
|
- Initiate drill/Shave change -- switches to tools high automatically
|
|
M07T(1-15)
|
- Backside Tooling Code
|
|
M30
|
- Program End and Rewind
|
|
M40TttttUuu.u
|
- Normality Sensors ON (U in mm)
|
|
M43Yy.yVv.v
|
- Y and V tracers ON (Y and V in mm)
Only the tracer to be turned on is included |
|
M50S(0/1)T(1-9999)
|
- Hole Probing ON
|
|
G160
|
- Rivet Cycle
|
|
G161
|
- Drill Cycle – overloaded
|
|
M250T(3-36)
|
- Feed Fastener T = grip. Must have R-decode selected.
|
|
M251
|
- Feed Collar
|
|
M302T(1-4)S
|
- HS Lube Test. T-code specifies how many individual pumps will cycle.
- S-code 0 or default no air, 1 for air blast |
|
M303T(1-4)S
|
- Thru-bit Lube Test. T-code set which individual pump will cycle.
- S-code 0 or default no air, 1 for air blast |
|
M56T(1-7)
|
- Select clamp pad.
|
|
M80
|
- Select Jig
|
|
M143[optY optV]
|
- Tracers OFF
|
|
M151Tt
|
-load clamping table, get T from table values
|
|
M150Ttt
|
- Load Fastener Data. Loads fastener voltages, and for rivets, die cavity depths, from files stored on the Machine Control PC.
|