Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
24 Cards in this Set
- Front
- Back
What is the purpose of the equipment tag-out procedures?
|
Provides units with a standardized equipment tag-out procedure as required by COMDTINST M9000.6
|
|
The use of tag is temporary and not a substitue for what?
|
Chaining, locking valves, removing fuses, or racking out circuit breakers.
|
|
Tags should never be used for what?
|
valve identification, marking leaks, or any purpose not specified in teh tag-out procedure manual
|
|
Caution tags are what color?
|
Yellow
|
|
Danger tags are what color?
|
Red
|
|
Out-of-Calibration tag is what color?
|
Orange
|
|
Out-of-commission tag is what color?
|
Red
|
|
Which tag provides a special set of instructions and you must get permission from the EOW before use.
|
Caution Tag
|
|
Which tag prevents any and all use of equipment under all circumstances?
|
Danger Tag
|
|
Which label identifys equipment that may not give proper indications due to being out of tollerance.
|
Out-Of-Calibration Label
|
|
Which label identifys equipment not in use because of being defective or issolated from the system?
|
Out-Of-Commission Label
|
|
How many tag-out logs are required for WHEC, WMEC, and WAGB cutter classes?
|
Two to be maintained by operations and engineering departments.
|
|
A copy of what should be placed in the front of the tag-out log?
|
A copy of teh AUTHORIZED OFFICERS letter(s)
|
|
Who is ultimately responsible for the safety of all maintenance personnel and for the protection of the cutters equipment?
|
Commanding Officer
|
|
After a tag is placed what must a second person do?
|
Verify that the system or equipment is in the position or condition indicated by the tag and that the tag is properly placed.
|
|
The person cheking the tag shall not be what?
|
The same person who attached the tag
|
|
Danger and Caution tags shall be removed when?
|
Immediatley when the situation requireing the tag-outs has been corrected.
|
|
No tags shall be cleared without approval from who?
|
Authorizing Officer
|
|
Who can remove a tag and submit it for clearance?
|
ONLY the person who attached it.
|
|
When there are multiple tags in place which ones take precedence?
|
Danger tags
|
|
Checks and Audits of all tag-outs are required how often, and by who?
|
Once every two weeks by the cognizant department head.
|
|
Who should perform a spot check of installed tags?
|
Authorizing Officer's
|
|
The tag number shall start on what date of each year? And what number will they start at?
|
01 October
(E/O)-001 |
|
Who is responsible for ensuring a daily inventory of all department PMS tags by serial number?
|
The Department Head
|