Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
15 Cards in this Set
- Front
- Back
Mechanical Safety |
Round cannot be fired until it is fully supported in the chamber |
|
Additional safety |
Any device incorporated into a weapon design to prevent unintentional discharg |
|
Applied Safely |
Measure designed to be operated by the soldier |
|
Short stroke piston |
Independent to the breech block |
|
Short recoil |
Breech and barrel are detached after short travel |
|
Sear |
What engages to the bent on striker/firing pin |
|
Bent |
Trigger component engages to hold components ready for firing |
|
Barrel exterior |
Breech face, shank, reinforce, tube, muzzle, crown, bore, chamber |
|
Shading of barrel |
Straight, Bent upwards, bent downwards, bent left, bent right |
|
COO and expanples |
Fire- Striker Unlocked- Lug locking Extract- Multi- piece claw Eject- Fixed to bolt way Feed- Magazine Load- Feed horn Lock- Lug locking Cock- Sear engages bent |
|
Feed systems |
Box- Drum- Tube- Can all be spring driven or gun driven |
|
Gas operated |
Energy required to carry out COO is obtained by ducting of propellant gases to force working parts back |
|
Gas operated pistons |
Short stroke Long stroke Direct gas action |
|
Recoil and types |
Energy required to carry out COO is supplied to the bolt and barrel locked together and free to move Long recoil- Breech and barrel locked together Short recoil- Breech and barrel detached Inertia- Bolt and bolt carrier separated by inertia spring |
|
Blowback and types |
In which energy required to carry out COO is supplied to bolt Simple/Pure Blowback with delay Blowback with advanced primer ignition Blowback with locked breech |