Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
21 Cards in this Set
- Front
- Back
Sullube |
Tank D-2011 Pale green Preset # 1 41 lbs |
|
SSR |
Tank D-2010 Pale - Grey Preset # 3 43.43lbs |
|
Tech Gold |
Tank - D- 40 & 41 Bucket - Blue Preset #2 43lbs |
|
LIMS |
SX manager |
|
What is the backup system if the ink jet printer is un-operable |
Print 4×2 Labels with lot number and manually stick on pails |
|
What are some important things to remember about the ink jet printer |
Clean the heads before every use, turn off jet, shut down after use, check ink levels before use, confirm batch number. |
|
When lifting full pails with the lift arm,what do you do when one or more pails are missed |
Immediately set down on the. back row disengage pails hook up all pails |
|
What preventative maintenance needs to be performed on the filling station prior to use? |
Confirmed the wing nuts are secure on the lance hoses |
|
How are the top stack of pails safely lowered |
Forklift driver brings double stack, other worker pushes topstack onto the raised forks |
|
How are the handles positioned on the pails and why? |
Down and facing the back of the pale because they can become an obstacle to lances and caps |
|
What critical information should you fill out on the pail card? |
Product Amount to fill Vessel Lot # Dow order # Labels printed & counted Lable/card maker Material Handler section Signature Operators names Date & shift
|
|
What are some hazards associated with insufficient line clearing |
PSCE Thermal expansion product freezing cross-contamination. |
|
What steps would you take if you had a spill in the warehouse |
Shut down isolate leak contain contain leak if possible call IRL barricade area |
|
ECOP |
Exclusive control operating procedure |
|
Equipment must be isolated by one or more of the following isolation methods for ECOP |
De-energized Tagged |
|
What are the common cardinal rules associated with the warehouse process |
Always depressurize equipment before opening Always allow room for thermal expansion When blocking in liquid filled systems Always perform visual inspections and leak checks on hoses before use Always close manual valves slow to prevent pressure surge effects Always provide vent relief or a pressure source to prevent vacuum collapse of tank or shipping container |
|
Cardinal rules for packaging and drumming |
Always ground any package that has grounding provisions
Always allow room for thermal expansion and vapor pressure when dealing with product above ambient temperature
Always deenergize and depressure equipment before putting yourself in the line of fire |
|
Who gets verification that the taint has been released to distribution? And where is this document kept |
SAC , projected load schedule |
|
What is the pattern we stack the pails in and why |
Stack the labels facing out and alternate each row.So the lot number is visible and to create stability |
|
Why do we never blow back to the tank of any products that we pale |
Air and the lines would create PSCE System is not designed for it Could overpressure tank The damage pump |
|
What program is used to schedule waste |
WIBLA |