Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
6 Cards in this Set
- Front
- Back
If the trigger on an X26 is held down beyond 5 seconds: |
The electrical discharge will continue until the trigger is released |
|
With the safety switch if the x26 in the up ( Armed) position, a single trigger pull and release will initiate: |
A 5 second cycle |
|
If the safety switch of the x26 is put in the down (safe) position during the discharge cycle: |
The cycle will stop immediately |
|
If you see a "p" on the CID of an x26: |
Leave the x26 alone until it has completed the boor sequence |
|
When the x26 system "sleeps" after being armed for 20 minutes : |
Re-arm by flipping safety switch down and then flipping back up: |
|
400 megahertz (MHz) radios can interfere with proper x26 operation: |
All of the above |