Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
66 Cards in this Set
- Front
- Back
|
Who is the key individual who allocates the maintenance resources required to meet mission requirements? |
Wing commander |
|
|
Who monitors new requirements for training, equipment authorizations, special tools, work space, and manning? |
Maintenence squadron commander |
|
|
What is the main responsibility of the flight commander/chief? |
Management, supervision, and training of assigned personnel |
|
|
The quality assurance program... |
Determines aircraft and equipment condition and personnel proficiency |
|
|
The aerospace ground equipment (AGE) flight services all AGE with the exception of... |
Non-powered munition trailers |
|
|
What is not a section of the maintenence support flight? |
Alternate Mission Equipment |
|
|
What publications contain broad, enduring guidance for preparing and employing Air Force resources to support national objectives? |
Air Force doctrine documents |
|
|
What are Air Force policy directives? |
Orders of the Secretary of the Air Force to initiate, govern, or regulate actions of conduct by Air Force activities at any level |
|
|
Air Force manuals may be supplemented at... |
Any level |
|
|
Major commands and field operating agencies may supplement any of the following publications types except |
Air Force policy directives |
|
|
Informational publications that guide, point out, or otherwise facilitate research are called |
Indexes |
|
|
As a rule, display of temporary visual aids should be limited to... |
90 days or less |
|
|
All of the following may be included and distributed by a bulletin board except... |
Classified information |
|
|
Maintenence data collection information is used as a tool for determining or validating manpower, budget, and |
Equipment requirements |
|
|
The maintenance data collection system provides equipment maintenance schedules and inventory information for maintenance requirements established on... |
A calender basis |
|
|
What major command is designed as the overall logistics manager for Air Force systems and equipment? |
Air Force Material Command |
|
|
What is the primary source of information for equipment configuration status accounting at base, command, and depot levels? |
Maintenance data collection system |
|
|
The reliably and maintainability information system is designed to accumulate data and provide the information nexessary to support the... |
Air Force equipment maintenance program |
|
|
The first five digits of the job control number indicate.... |
Year and Julian date |
|
|
The five-character maintenance data collection code that identifies organizational elements to which maintenance pesonnel are assigned is the... |
Work center code |
|
|
A work center that contributes labor towards a maintenance requirement is? |
A performing work center |
|
|
The Integrated Maintenance Data System screen that allows the operator to schedule jobs for their work center is what? |
053 |
|
|
The Integrated Maintenance Data System is not capable of automating... |
On-aircraft troubleshooting |
|
|
The Integrated Maintenance Data System is a... |
Base-level automated system used for maintenance management |
|
|
The primary purpose of the Integrated Maintenance Data System screen 380 is to... |
Provide an updated listing of all open job control numbers (JCN) |
|
|
Which Integrated Maintenance Data System screen and option can be viewed to allow narratives to a specific job data record to be modified? |
Screen 907, option 12 |
|
|
An online inquiry can be selected from Integrated Maintenance Data System screen 099 by simply inputting the... |
Option number |
|
|
Which Integrated Maintenance Data System screen displays a maintenence snapshot inquiry? |
122 |
|
|
What will cause the G081 weapons manage system to automatically disconnect? |
15 minutes of inactivity |
|
|
The four types of programs used in G081 weapons management system are data input, data output, variable information retrieval programs, and... |
Batch |
|
|
Of the four types of programs used in G081 weapons management system, which is considered to be the heart of the system? |
Data input |
|
|
What word will appear on your screen to notify you that the G081 weapons management system has been completely logged out? |
Mobility |
|
|
What is a basic principle of supply discipline? |
Effectively safeguard and preserve property |
|
|
Supply discipline starts with... |
Each individual |
|
|
Whose responsibility is it to ensure that everyone is knowledgeable and trained in supply discipline? |
Commanders and supervisors |
|
|
Property accountability is the obligation |
To keep accurate, auditable records of property |
|
|
Who is accountable for equipment items? |
Supply personnel equipment custodians |
|
|
To discharge their property, commanders issue... |
Instructions and directives |
|
|
A sergeant takes possession of a box which has fallen off a supply truck. Which type of property responsibly does the sergeant assume? |
Custodial |
|
|
When a person responsible for property is transfered and the property remains with the organization, property responsibly... |
Also stays in the organization |
|
|
What is used to explain and record the circumstances involving the loss, damage, or destruction of an equipment item that costs more than $500? |
Report of survey |
|
|
How does the deficiency reporting system reduce total ownership cost? |
Identifies system deficiencies early in its life cycle |
|
|
What is not a condition of four category one deficiency report? |
Is attributable to errors in workmanship |
|
|
Where is the originating point send deficiency report supporting data? |
Screening point |
|
|
What category of deficiency must be submitted within one workday? |
Category I |
|
|
What category of deficiency must be submitted three workdays? |
Category II |
|
|
What is the most common type of deficiency report you will encounter as an aircraft maintainer? |
Product Quality Deficiency Report |
|
|
If you wanted to address inquiries to the office of primary responsibility on a clarification interpretation, what section of the security classification guide would you use? |
General instructions |
|
|
What section of security classification guides applies more to defense contractors then to field maintenance technicians? |
Funding, procurement,and production |
|
|
What section of the security classification guide lists test equipment associated with the system? |
Ground support equipment |
|
|
The standard form 701, Activity Security Checklist, is used to... |
Record end of day security checks |
|
|
The standard form 702, Security Container Check Sheet, is used to... |
Document the opening and closing of security container |
|
|
If you order a Secret classified asset from the base supply, what do you need to have in order to receive custody of the asset? |
A military identification card and be listed on an authorization roster |
|
|
Which type of manual is a reduced size technical order which includes step-by-step procedures? |
Job guide |
|
|
Publications that contain instructions for use in addition to data contained in another manual are identified as... |
Supplemental manuals |
|
|
What letters are contained in numerical designator of a checklist technical order? |
CL |
|
|
Which is not a type of time compliance technical order? |
Emergency action |
|
|
When are technical order changes issued? |
Only when part of an existing TO is affected |
|
|
What type of TO supplement is printed on green paper to distinguish them from other supplements? |
TO page supplements |
|
|
Recommended changes to technical orders must be identified as either an improvement or... |
Correction type of change |
|
|
Who has responsibility for the determination and designation of Computer Software Configuration Items? |
Software manager |
|
|
The Automated Computer Program Identification Number System does not provide a system to establish... |
Contractor logistics software |
|
|
The Automated Computer Program Identification Number System provides software to support USAF customers... |
Worldwide |
|
|
The second field of the Computer Program Identification Number cannot be less than two positions or more than... |
27 positions |
|
|
Aeronautical nomenclature are type designation assignments for... |
Electronic systems and subsystems used throughout the Department of Defense |
|
|
**** you Ryan |
Yes **** You |
