Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
85 Cards in this Set
- Front
- Back
Where will the equipment requests be forwarded after being reviewed and validated by theequipment accountability element (EAE)?
|
AFMC SCM-R Equipment Activity
|
|
Who is responsible for signing custody receipts or listings for equipment assets charged totheir organization?
|
Property custodian. |
|
What term describes the items and quantities of equipment Air Force activities andindividuals normally required to carry out their mission? |
Allowance standards. |
|
Which code replaces the cost designator in the expendability, recoverability, reparability,cost designator (ERRCD) for an equipment item? |
Equipment management codes. |
|
The equipment custodian uses which Air Force form to request non-equipment authorizationinventory data items? |
2005 |
|
Which Air Force Form is used to request a change to an allowance standard or to request anitem that requires approval under miscellaneous allowance source code? |
AF Form 601. |
|
Which FCI format is used to load, change, or delete equipment authorized/in-use details? |
1 |
|
Which turn-in method is used to process the turn-in (TIN) before picking up the property? |
Pre-degraded operations. |
|
What activity code is used to process non-equipment authorization inventory data equipmentturn-ins? |
P |
|
What activity code is used to process equipment authorization inventory data equipmentturn-ins? |
E |
|
When a piece of equipment is no longer required or authorized, the equipment managementsection processes what input to reduce or delete an authorization? |
FCI |
|
Which listing is used to identify out-of-balance conditions? |
Q10 |
|
When signed by the property custodian which listing serves as a custody receipt? |
R14 |
|
Which listing provides visibility for high dollar value non-equipment authorizationinventory data items? |
R15, Organizational visibility list |
|
Which system is used to globally distinguish one item from all other items that theDepartment of Defense (DOD) buys or owns? |
Item Unique Identification. |
|
Who mandated the item unique identification (IUID) compliance process for equipmentassets with an acquisition cost of over $5,000? |
Department of Defense. |
|
Who will ensure Chief Financial Officer (CFO) data is loaded in the applicable MaterielManagement Information Technology system |
Equipment Accountability Element. |
|
Which special-purpose recoverables authorized maintenance (SPRAM) asset is used todetect a problem in online equipment? |
Fault isolation spares. |
|
Which asset categories are defined in the –21 technical order? |
Maintenance and safety protection equipment, alternate mission equipment, and crew andpassenger support equipment. |
|
Which report provides a listing of all items authorized, on-hand, and due-out, fororganizations authorized special-purpose recoverables authorized maintenance (SPRAM) assets? |
R25 |
|
When your base weapon assets are increased or decreased, what report do you send to theSmall Arms Registry at Robins Air Force Base? |
DSM |
|
Who works hand-in-hand with Logistics Readiness Squadron (LRS) to support missionrequirements? |
Air Force Materiel Command (AFMC) SCM-R Stock Control Activity. |
|
Which stock leveling term identifies quantities required to be on hand to permit continuousoperation due to minor interruptions of normal replenishment or unpredictable increases indemands? |
Safety level quantity. |
|
What must be established anytime stock is authorized for equipment items? |
Adjusted level. |
|
When one-for-one stock requisitioning is not needed, which adjusted minimum level shouldbe used? |
A |
|
Which type of adjusted stock level is assigned to an item to ensure the requisitioningobjective remains constant and does not fluctuate due to demand patterns? |
Fixed |
|
A request for an adjusted stock level is made on what Air Force form? |
1996 |
|
Which Materiel Management System program is used to review and validate adjusted stock levels? |
R35 |
|
What Air Force Materiel Command system computes readiness based level levels forselected XD items? |
D035E. |
|
Readiness-based level details are identified by type detail |
L, activity code A. |
|
What process was designed to set base level stocks on Defense Logistics Agency (DLA)managed items in a way that minimizes customer wait time? |
d. Customer oriented leveling technique (COLT). |
|
What process is used to compute levels for items that have no demand history or extremelylow historical demands? |
Proactive demand leveling. |
|
What process has a goal to reduce the number of non-stocked Mission Capables (MICAPs)items? |
Total asset visibility (TAV). |
|
What technology enables logisticians to identify, categorize, and locate assets? |
Radio frequency identification. |
|
Who is responsible for total item management including the requirements computation andsetting and updating base stock levels? |
Contractor inventory control points. |
|
What action occurs when Air Force Materiel Command (AFMC) and Contractor InventoryControl Points (CICP) direct asset redistribution? |
Redistribution orders. |
|
What document identification code indicates a denial to a redistribution order sent by AirForce Materiel Command item managers? |
B7* |
|
Which redistribution results when local management decides to force shipment and/orredistribution of base operating stocks? |
Nondirected |
|
What transaction exception code is used to process a return for an item damaged in shipment? |
P |
|
What transaction exception code is used to process a transfer of materiel to DefenseLogistics Agency Disposition Services (DLADS)? |
TRM |
|
As a minimum, item records with a shipping exception code are reviewed and validated |
Semiannually |
|
An automatic requisition to the source of supply is identified by what documentidentification code? |
A0* |
|
Which transaction identifier code (TRIC) is used to process a special requisition? |
SPR. |
|
Which serial numbers are used for off-line requisitions? |
9000–9899. |
|
Program control uses what system to assign a requisition priority for each requisition? |
Uniform Materiel Movement and Issue Priority System (UMMIPS). |
|
What codes are used to determine the requisitioning priority designator used at the source of supply? |
FAD, urgency-of-need designator (UND) |
|
Who does the source of supply (SOS) owe an item to when a due-in detail is established after being requisitioned? |
Requisitioning activity. |
|
What part of the due-in document identifies the base that placed the requisition? |
Address code. |
|
How often will requisition exception codes (REX) be reviewed and validated? |
Semi-Annual. |
|
Which requisition exception codes (REX) is assigned under program control due to MilitaryStandard Requisitioning and Issue Procedures (MILSTRIP) status? |
1 |
|
Which military standard requisitioning and issue procedures (MILSTRIP) status has theworst effect on an account? |
Cancellation. |
|
Which type of military standard requisitioning and issue procedures (MILSTRIP) statusresults from out-of-stock conditions, new requirements, and other conditions that stop the supplysource from filling the requisition exactly as it was requested? |
Exception/other. |
|
Which transaction identifier code (TRIC) is processed to request an improved estimatedavailability date or estimated shipment date for priority 01–08 requisitions? |
AFC. |
|
What reconciliation flag on the status detail record indicates that the transactionidentification code AFC action is to request improved status on a requisition? |
C. |
|
Supply difficulty for Air Force-managed items are reported on which Air Force form? |
1667 |
|
Which listing includes the due-ins that have been received, but remain in the computersbecause the receipts have not been completely cleared? |
Receipt acknowledged error. |
|
Which transaction is processed to initiate tracer action and update transaction tracer flags onshipment status details? |
Tracer action required (TAR) |
|
Which section will receive all tracer action required (TAR) documentation for adjustment processing? |
Inventory. |
|
How many days after the last follow-up date will the tracer action required (TAR) requestbe reentered into the Materiel Management System? |
40. |
|
Which listing is used to perform due-out review and validation? |
D18 and R01. |
|
When a due-out cancellation was processed in the Core Automated Maintenance System(CAMS), what review code is used on the due-out-cancellation input? |
M. |
|
The factors involved in the due-out release sequence are FAD, UJC, project code, and |
document number date. |
|
Which transaction is processed to change various data elements on retail MaterielManagement System due-in details? |
Due-in/due out (DIT). |
|
When processing a due-in/due-out (DIT) transaction which code is used to unlink due-inand due-out details? |
* |
|
Military Management System programs create cancellation requests to control |
excess stockage. |
|
How many days will local purchase items appear on the listing after the vendor bill isreceived and processed for Billed Not Received (BNR) transactions? |
7 |
|
What detail is created by the Materiel Management System whenever a referral order ishonored and a credit is given to the shipping base? |
Shipped not credited. |
|
Which search screen in Web Federal Logistics Information System (WebFLIS) allows usersto locate manufacturer names for the code entered? |
CAGE. |
|
Which system provides Air Force personnel with on-line cataloging, standardization, andother logistics management data for Air Force managed or user items? |
D043 A. |
|
What section of the illustrated parts breakdown (IPB) provides a sequential listing of all partnumbers appearing in the technical order? |
Numerical index. |
|
Which code in an illustrated parts breakdown (IPB) provides maintenance activities withrepair level responsibility, support methods, and disposition instructions? |
Source, maintenance, and recoverability (SMR). |
|
Which position of the source, maintenance, and recoverability code (SMR) reflects thedisposition action for unserviceable assets? |
Recoverability. |
|
The transaction identification code (TRIC) FIL establishes what basic record? |
Item and repair cycle record |
|
What transaction identification code (TRIC) establishes the part number record? |
FIL or 1AA. |
|
What purpose does the part number detail record serve? |
Automates the part number to stock number cross-reference file. |
|
Who assigns non-catalogued numbers? |
Air Logistics Center (ALC) Item Manager. |
|
Which transaction identification code (TRIC) is used to change the stock number;expendability, recoverability, reparability, cost designator (ERRCD), equipment managementcode (EMC), routing identifier, or budget code on the item record? |
FIC. |
|
What is the maximum number of characters for the descriptive nomenclature field on theitem record? |
32. |
|
For internal records what transaction identification code (TRIC) changes the unit price, unitof issue, and quantity unit pack (except for local purchase [LP] items) fields? |
FCU |
|
Registered users of the stock number user directory (SNUD) and Air Force MaterielCommand (AFMC) SNUD file are reconciled |
annually. |
|
What computer system provides interchangeable and substitute group information? |
D043B |
|
Which code identifies the order in which items within interchangeability and substitution(I&S) grouping are substituted or issued? |
Order of use. |
|
Which interchangeable and substitution group (ISG) relationship code identifies an itemthat can only be used in place of another for a particular use or under certain conditions? |
S. |
|
What transaction identification code (TRIC) code is used to load, change, or deleteinterchangeable and substitution group (ISG) items? |
FIS. |
|
Who mut justify in writing the request to load, change, or delete interchangeable andsubstitution group (ISG) items? |
Using activity. |