Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
56 Cards in this Set
- Front
- Back
What is the feed inlet pressure for 200gpm purifier? |
4-10psi |
|
Back pressure of discharge of 200gpm purifier? |
Mini:25psi ideal:30psi Max:35psi |
|
Feed inlet pressure for 300gpm purifier? |
15-25psi |
|
What is the Bowl speed of the purifier? |
4100rpm |
|
What allows the cover to be lifted out of the way for disassembly and cleaning of the bowl? |
Cover Hinges |
|
What is used to lock the cover in a open position? |
Ratchet Hook |
|
The feed tube has what kind of threads? |
Left-hand |
|
What must be disengaged from the paring disk before the cover can be opened? |
Feed tube |
|
What is installed between the piping and tubing to prevent leakage? |
Chevron-shaped oil resistant rubber seal |
|
The feed inlet tube and the purifier JP-5 discharge tube both connect to? |
The feed tube assembly at the top of the cover |
|
What prevents leakage of liquids between each tube and the feed tube assembly? |
Oil-resistant seal(O-ring) |
|
What is located between the inlet and discharge tubes, directs freshwater into the revolving for a use as a seal? |
Seal-water inlet |
|
What is the shaft for the Paring disk? |
Feed tube |
|
What is used to screw the feed tube into the paring disk and extends out the top of the feed tube assembly? |
The spring loaded handle |
|
When the feed Tube and paring disk are engaged what position is the handle? |
Down position |
|
What is used to lock the cover in the closed position? |
3 hand-wheel Cover clamps |
|
What is inside the dome shape? |
Water-discharge chamber |
|
When the water is directed to the water-discharged outlet area of the water-discharge chamber, what is used as a visual check of the discharged water? |
Observation port |
|
What provides a liquid-tight seal between the cover and the bowl casing when the cover is closed? |
Large oil-resistant ring |
|
What locks the bowl shell assembly during disassembly and assembly? |
2 bowl shell lock screws |
|
What is engaged to prevent the bowl shell assembly from rotating? |
2 bowl shell lock screws |
|
Before starting the purifier what must be removed? |
Bowl shell lock screws |
|
The lower end of the bowl casing's water-discharge connection is flanged to? |
Water-discharge line |
|
The water discharge line directs water into? |
Sump Tank |
|
What is the vertical drive shaft for the bowl shell assembly? |
Spindle Assembly |
|
What is the vertical drive shaft for the bowl shell assembly? |
Spindle Assembly |
|
How many set of ball bearing support the spindle? |
3 set of ball bearings |
|
What is the vertical drive shaft for the bowl shell assembly? |
Spindle Assembly |
|
How many set of ball bearing support the spindle? |
3 set of ball bearings |
|
What is located between the upper and lower bearings of the center set of ball bearings? |
A large vertical spring |
|
When the purifier has started, what acts as a shock absorber to absorb any vertical thrust of the Spindles shaft? |
The large vertical spring |
|
How many springs surround the upper set of ball bearings? |
6 equally spaced horizontal springs |
|
How many springs surround the upper set of ball bearings? |
6 equally spaced horizontal springs |
|
The lower end of the spindle's shaft is geared to the horizontal drive shaft of the direct drive assembly by what? |
Worm Quill |
|
How many springs surround the upper set of ball bearings? |
6 equally spaced horizontal springs |
|
The lower end of the spindle's shaft is geared to the horizontal drive shaft of the direct drive assembly by what? |
Worm Quill |
|
The drive assembly transmitted drive motor power to ______, which in turn, transmits power to the bowl shell assembly. |
Spindle |
|
How many springs surround the upper set of ball bearings? |
6 equally spaced horizontal springs |
|
The lower end of the spindle's shaft is geared to the horizontal drive shaft of the direct drive assembly by what? |
Worm Quill |
|
The drive assembly transmitted drive motor power to ______, which in turn, transmits power to the bowl shell assembly. |
Spindle |
|
The direct drive assembly connects the lucifer to the motor shaft by a_______? |
Flexible Coupling |
|
The coupling consist of how many halves? |
2 halves |
|
The coupling consist of how many halves? |
2 halves |
|
One end is fitted to_____? The purifier end is fastened to the____? |
One is fitted to the motor shaft and the purifier end is fastened to the brake drum with 4 bolts |
|
Each coupling half has ____ that engage a rubber cushion installed between the two coupling halves. |
Protruding Studs |
|
The drive motor shaft turns ____, which turns the _____? |
Turns the coupling which turns the horizontal drive shaft |
|
The drive motor shaft turns ____, which turns the _____? |
Turns the coupling which turns the horizontal drive shaft |
|
The horizontal drive shaft is supported what kind of ball bearings? |
(2) outer and inner bearings |
|
A _____ is keyed to the drive shaft and engages the worm quill at the base of the spindle assembly. |
Worm wheel gear |
|
A smaller gear, which is part of the worm wheel gear, is used to drive the _______? |
Speed Counter |
|
During the full bowl rpm, the count should be between ____ and _____ times per minute. |
146 to 152 times per min |
|
Because of the gear ratio, the drive motor rotates at _____, and the bowl rotates at ______. |
Drive motor rotates at. 1770-1775 rpm Bowl rotates at 4100rpm |
|
The ______ provides the working area for seperation of contaminants from JP-5. |
Bowl Shell Assembly |
|
The entire bowl shell assembly sits on top of what? |
The Spindley Assembly |
|
What causes the bowl shell assembly to rotate? |
The Spindley Assembly |
|
During this operation, the bowl shell assembly contains a _____ to prevent the loss of JP-5. |
Fresh water seal |