Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
65 Cards in this Set
- Front
- Back
What is considered the handbook for aircraft maintenance management in the US Air Force?
|
AFI 21-101
|
|
What are the two basic categories of maintenance
|
On-equipment and off-equipment
|
|
Who approves the IPI listing?
|
WG/CC.
|
|
Who is responsible to the operations officer/MX SUPT for the leadership, supervision, and training of assigned personnel?
|
The flight commander/chief.
|
|
Who directs the overall maintenance effort for their unit?
|
Production superintendent.
|
|
What group has the primary responsibility for aerospace equipment maintenance?
|
Maintenance.
|
|
How many squadrons exist within the MXG?
|
3
|
|
Within MXS, what flight does the hydraulic in-shop fall under?
|
Accessories.
|
|
Your role in the IMDS process starts with what?
|
Entering accurate data into the CDB.
|
|
What IMDS subsystem allows the tracking of maintenance actions and has both maintenance and supply data?
|
Maintenance Events.
|
|
What IMDS subsystem provides an on-line capability for maintenance personnel to document, inquire, and produce retrievals of maintenance actions?
|
JDD.
|
|
What section of AFTO Form 244 lists discrepancies pertinent to the flight-line mechanic?
|
V
|
|
How would you write 19 Jan 2011 on an aircraft or support equipment maintenance form?
|
20110119
|
|
What symbol in the aircraft forms represents the least serious condition?
|
Red diagonal.
|
|
Which term is not an element of the maintenance training program?
|
Cross-utilization training.
|
|
Training people to do other tasks in addition to their primary AFSC tasks is called what?
|
Cross-utilization training.
|
|
Which aircraft periodic inspection is used to detect defects that could have developed during ground operation of an aircraft?
|
End-of-runway
|
|
What is an advantage of a phased inspection over other inspections?
|
It helps to reduce the out-of-commission time that might be required during a combined HPO
|
|
Which isochronal aircraft inspection is a “thorough and searching” inspection of the aircraft?
|
Major
|
|
What MAJCOM operates the entire Air Force material management system?
|
AFMC
|
|
What does the first part of an NSC indicate?
|
National supply classification.
|
|
What does the first position of an ERRC identify?
|
Expendability of the item.
|
|
What does the second position of an ERRC identify?
|
Highest repair level of the item
|
|
How often does DLA issue FED LOG compact disks
|
Monthly
|
|
How many search queries can you process at a time with the interactive program in FED LOG?
|
One
|
|
How many search queries can you process at a time with the batch program in FED LOG?
|
Multiple
|
|
What computer system allows users to search for a supplier’s specific information, such as their name and address?
|
FED LOG.
|
|
While conducting an inventory of bench stock you notice a due-out card in one of the bins, what does this indicate?
|
Part is already on order.
|
|
Normally shop stock usage should not exceed how many days?
|
90
|
|
Who is responsible for the DLR program?
|
Repairable support division.
|
|
The standard price of a DLR item is charged against the maintenance unit if the item is not AWP and held for more than
|
60 days
|
|
Before an item is issued from Supply, Demand Processing must have certain information recorded on what AF Form?
|
2005
|
|
What form is used to issue equipment on a temporary basis?
|
1297
|
|
What form does Supply use for a DIFM notice?
|
AF Form 1297.
|
|
What is an important point to keep in mind when you are describing a discrepancy on an AFTO Form 350 tag?
|
To be very specific.
|
|
What supply condition tag would be attached to a part that has been repaired and ready to be turned into Supply?
|
DD Form 1574.
|
|
Once a defect is identified for a CAT I deficiency, the originator must forward the draft DR to the originating point within how many days?
|
1
|
|
A Category II DR submitted for a defect in workmanship must be forwarded to the originating point within how many workdays?
|
3
|
|
Air Force property responsibility is imposed “by law” on who?
|
All military and civilian employees
|
|
If you are in physical possession of a piece of Government property, what kind of responsibility have you assumed?
|
Custodial
|
|
If you are in physical possession of a piece of Government property, what kind of responsibility have you assumed?
|
Custodial
|
|
How can personnel be relieved from property responsibility?
|
Turn-in or transfer.
|
|
Which TO tells us how to maintain and inspect a particular weapons system?
|
Technical manual
|
|
In the basic TO numbering system, each TO number has a minimum of how many number groups?
|
Three
|
|
he first number group within a TO number identifies what?
|
The TO category.
|
|
Which MIDAS TO number group describes the type of TO?
|
Fourth
|
|
Using the MIDAS TO system, which TO would you use to find a brief description of an aircraft’s system or subsystem?
|
GV
|
|
What kind of TO contains an in-depth breakdown of each maintenance manual and a master listing of all maintenance TOs?
|
GV
|
|
What kind of TO contains operational checkout procedures?
|
JG
|
|
Revisions are made instead of changes when the basic TO consists of what?
|
Eight pages or less.
|
|
Safety and operational supplements to TOs should be filed in what order?
|
Reverse sequence in front of the basic TO.
|
|
What TO deficiency report is used to identify immediate corrections that involve safety?
|
Emergency
|
|
What percent of accidents is caused by nature?
|
Two
|
|
When temporarily allowing a potentially dangerous condition to exist, you must
|
post warning signs.
|
|
Which AFOSH standard covers personal protective equipment?
|
91–501.
|
|
When is the wearing of metal-rim glasses forbidden?
|
When maintaining electrical systems.
|
|
How is an oil-free nitrogen bottle identified?
|
Two 3 inch black bands around the shoulder.
|
|
Which mishap prevention tag is used to warn personnel against potential hazards?
|
Caution
|
|
Ear plugs alone will not protect you above
|
130 decibels.
|
|
How many feet in front of a rotating propeller should you stand?
|
25
|
|
What AFI outlines the Nuclear Surety Program?
|
AFI 91–101.
|
|
What method is used to certify individuals to work on or near nuclear weapons?
|
Personnel Reliability Program.
|
|
Which statement is not a step in the certification process for the PRP?
|
Interviewing your spouse.
|
|
A program designed to make sure that a lone individual cannot perform an incorrect act or unauthorized procedure on a nuclear weapon system, is called
|
Two-Person Concept.
|
|
What program directs the installation of seals and indicators to verify that no one has tampered with or accidentally activated a certified critical component?
|
Tamper Detection Program.
|