• Shuffle
    Toggle On
    Toggle Off
  • Alphabetize
    Toggle On
    Toggle Off
  • Front First
    Toggle On
    Toggle Off
  • Both Sides
    Toggle On
    Toggle Off
  • Read
    Toggle On
    Toggle Off
Reading...
Front

Card Range To Study

through

image

Play button

image

Play button

image

Progress

1/34

Click to flip

Use LEFT and RIGHT arrow keys to navigate between flashcards;

Use UP and DOWN arrow keys to flip the card;

H to show hint;

A reads text to speech;

34 Cards in this Set

  • Front
  • Back
Why is smoking prohibited near a battery shop?
Hydrogen gas
Battery shop air changes should be done how often?
3 to 4 times per hour
What do you fight a class Delta fire with?
water
How long is the burn time for a lean to attached to a hanger?
1 hour
What maintenance can a class C unit accomplish?
Preservation, inspection,examination,specified bench test,correction of discreps, calibration, repair and or replacement,emergency manufacturing.
What is the flash point of JP-4?
Below 0 F
What is the first step in troubleshooting?
Analyse discrepancy
What is the most common engine failure?
FOD
What % of mishaps are related to maintenance?
20%
If you have a crack on a Jack leg that is 3/4" What should be done to the Jack?
weld up to 1" but not on lifting cylinder
On a flareless fitting how much longitudinal movement is allowed?
1/64"
What % do you load test lifting slings to?
200%
After you install a line, how can you tell if it is twisted?
lay line
Who is responsible for ensuring that there is a tool calibration program on place?
CO
What are the seven steps of ORM?
1) Identify mission tasks
2) Identify hazards
3) Assess risk
4) Identify options
5) Evaluate risk vs gain
6) Execute decision
7) Monitor situation
Who is responsible for ensuring that tools are calibrated?
QA - PG110A - of 1-2.b.h
How often are flight line fire bottles hydrostatically tested?
5 years
How many damage classifications ate there in the 1-1A-1?
4
What test box is used for H-60 vibes?
Gelatin rotortuner us-5
What manual would you use for fuel surveillance and quality?
AFTO 42B-1-1 Quality control of fuels and lubricants.
If you receive shop equipment that is not painted the right color when does or require painting?
Next time it needs paint
What are the methods for decontaminating a hydraulic system?
Air bleeding, reticulation cleaning, purifying, flushing,purging
In What manual would you find the requirements for shop lighting?
PG-85-00-110A
Who is responsible for assisting the CO with setting up the confined space program?
Aviation gas free engineer
What do mark empty gas cylinders with?
Chalk
How far should flammable be kept from stoves and furnaces?
10 feet
Who is responsible for maintaining fire fighting equipment?
Physical security officer
What must be done prior to connecting or disconnecting a ground power unit?
Turn it off
What is the color for a shock hazard?
orange
How high should the hanger door switch be?
4 feet

what should the wash rack water temp be?

120-140

How far in from the leading edge of a hanger door should the switch be?
4 inches
How high should electrical outlets be?
18"
How long should the hanger door delay be?
5 sec