Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
57 Cards in this Set
- Front
- Back
An important objective of the NAMP is to achieve and maintain maximum material readiness. What is an additional objective of the NAMP?
|
Safety and conservation of material
|
|
What is the purpose of the Aircraft Maintenance Department within an organization?
|
Maintain assigned aircraft in a Full-Mission-Capable state in support of the units mission
|
|
What are the major types of aircraft maintenance?
|
Rework and upkeep
|
|
Restorative work performed on an item of support equipment is considered what type of work
|
Rework
|
|
A comprehensive depot-level inspection of selected aircraft structures and materials and correction of any critical defects is what type of maintenance?
|
Standard rework
|
|
Maintenance performed on aircraft or equipment to improve its specific function is known as what type of maintenance?
|
Special rework maintenance
|
|
Preventive, restorative, or additive work performed on aircraft, equipment, and support equipment by an operating unit is what type of maintenance?
|
upkeep
|
|
scheduled work is performed on an aircraft as a result of its completing a prescribed number of flying hours. What type of maintenance is this?
|
Standard upkeep
|
|
The ability of an aircraft to perform its mission was changed by alteration without regard to flying hours. What type of maintenance is this?
|
Special upkeep
|
|
Aircraft maintenance is divided into what total number of maintenance levels?
|
three
|
|
Centralized local maintenance is performed by which of the following activities?
|
AIMD
|
|
Work performed by an operating unit on a day-to-day basis in support of its own operations is known as what type of maintenance?
|
Organizational Level
|
|
Servicing aircraft and preflight inspections are actions that are performed at what level of maintenance?
|
Organizational
|
|
Work performed in a centrally located facility within a geographical area is known as what type of maintenance?
|
Intermediate level
|
|
Work performed at an industrial-type facility is known as what type of maintenance?
|
Depot level
|
|
The Naval Aviation Maintenance Program is sponsored and directed by what command?
|
CNO
|
|
Material and technical support for the NAMP are provided by the cognizant systmes command and which other command?
|
NAVSUP
|
|
What type of relationship exists between a superior an a subordinate?
|
line
|
|
According to directives from higher authority, what officer directs the aircraft maintenance department?
|
The aircraft maintenance officer
|
|
The functional management responsibilities for the planning, control, and production of the aircraft maintenance department rest with which officer?
|
Aircraft maintenance officer
|
|
Which of the following officers ensures that staff divisions at the organizational level conform to established policies?
|
The assistant aircraft maintenance officer
|
|
Assuring that high quality maintenance work is performed is a function of what division in an organizational-level maint. department?
|
Quality assurance
|
|
Which of the following main. concepts allows you to regulate events rather than be regulated by them?
|
prevention
|
|
Within an organizational-level main. activity, what part of the activity monitors, controls, and applies the MDS?
|
System administrator/analysis
|
|
What officer is directly responsible for the overall production effort and material support of the organizational-level maint. department?
|
the maintenance material control officer
|
|
What branch or division is known as the nerve center of an organizational-level maintenance department?
|
Maintenance control
|
|
The power plants, airframes, and aviator's life support equipment branches belong to what division of an organizational-level maintenance department?
|
Aircraft
|
|
If you work in electronics, instruments, or armament, you are normally assigned to what division of an O-level maintenance department?
|
Avionics/armament
|
|
In an I-level maintenance activity, what is the central point of the maintenance effort?
|
Production control
|
|
Normally, the I-level organization has a total of how many production divisions?
|
six
|
|
What system provides O-level and I-level maintenance activities with a computer-based management information system?
|
NALCOMIS
|
|
Maintenance managers need current status information to control the maintenance effort. What system is designed to provide maintenance managers with this information?
|
VIDS
|
|
The VIDS boards in each work center are verified with the maintenance control VIDS board a minimum of how often?
|
Once each day
|
|
After the personnel in maintenance control complete the required blocks of a newly initiated VIDS/MAF, copies 1 and 5 are forwarded to?
|
the work center
|
|
If a check flight is required after the completion of a corrective action, notification must be given to what individual?
|
The quality assurance division officer
|
|
After a discrepancy has been corrected, what should be done with copies 1 and 5 of the VIDS/MAF?
|
Copy 1 should be sent to maintenance control, and copy 5 is to be placed in the work center files.
|
|
At the I-level of maintenance, what copies of the VIDS/MAF are forwarded to the work center upon component induction for repair?
|
Copies 1, 4, and 5
|
|
A component goes into an AWP status at I-level. What action is completed first with regard to the component?
|
It is properly packaged and preserved.
|
|
Information entered on MDS forms must always meet which of the following requirements?
|
Be accurate and complete
|
|
On-equipment maintenance actions are documented on ?
|
NALCOMIS or a VIDS/MAF
|
|
The portion of an inspection that involves the search for defects is known as what phase
|
Look
|
|
An organizational code, the Julian date, a sequence number, and a suffix are part of what code or control number?
|
Job control number (JCN)
|
|
Maintenance was performed on an item identified by a Work Unit Code. What type of code describes this action?
|
Action Taken
|
|
What type of code identifies a subassembly repair action that is completed separately from the major component repair action?
|
JCN suffix
|
|
What type of code identifies the system, specific engine, or component/part on which work is being performed?
|
Work Unit Code
|
|
What type of code describes the trouble or cause of trouble in a system or component?
|
Malfunction Code
|
|
What code is often referred to as the manufacturers code?
|
CAGE
|
|
An aircraft has 479 flight hours on it since new. You have just removed and replaced a damaged canopy. What entry should you place in the Time/Cycles block on the VIDS/MAF?
|
A0479
|
|
A technical directive status code consists of how many characters?
|
ONe
|
|
SE custody and maintenance history record, OPNAV 4790/51, is used for?
|
Record custody and transfer info, provide rework and overhaul data, identify applicable and incorporated technical directives
|
|
Of the following equipment, which one requires an OPNAV 4790/51 card?
|
VAST stations
|
|
ON initiation of each new OPNAV 4790/51, reporting custodians retain the latest processed copy from the permanent custodian. A current copy is also maintained with any accumulated data transcribed to it. (T/F)
|
True
|
|
What document provides scheduled control of the predictable maintenance workload?
|
Monthly Maintenance Plan
|
|
At the O-level what officer sets the format and arrangement of the monthly maintenance plan?
|
The aircraft maintenance officer
|
|
At the o-level the MMP is distributed by what day of the month prior to the month to which it applies?
|
25th
|
|
What information is included in the MMP?
|
Current list of QARs, High-time components, schedule of technical training
|
|
To increase technical knowledge levels and enhance and improve existing formal training through diagnostic testing procedures is the primary goal of which of the following programs
|
MTIP
|