Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
13 Cards in this Set
- Front
- Back
Which microphones can help you give more separation of tracks and allow for a bit more control later on? |
Dynamic microphones |
|
What type of condenser microphones are good for capturing the detail of a room, and also tend to have a better lower frequency response than other condenser microphones? |
Large diaphragm condenser microphones |
|
True or False? When choosing a microphone for a particular task in a tracking session, only the mic's frequency response comes into play. |
False |
|
List four considerations when choosing a microphone. |
1. Frequency response 2. Transient response 3. Sensitivity 4. Pickup [polar] pattern |
|
Fill in the blank: After getting ready for your tracking session, saving a ________ in Pro Tools is an easy way to bring up the same settings for the next song on the album. |
Template |
|
Fill in the blank: "Getting levels" is the term that refers to setting the _______ levels in a session. |
Input |
|
What device is typically used to connect a high-impedance, line level, unbalanced output signal to a low-impedance microphone level balanced input? |
A DI (Direct Injection) Box |
|
In general, which microphones will produce the least amount of bleed? |
Dynamic moving coil microphones |
|
What is the point of doing a line check? |
Making sure all microphones are working properly and showing up in the right place. |
|
Fill in the blank: Placing a __________ in a kick drum will help deaden it. |
Pillow or blanket |
|
When placing two microphones on a guitar cab, what is the most important thing to make sure of? |
That the microphones are phase aligned |
|
When recording keyboards and drum machines, when is it a good idea to apple EQ and compression? |
Later on (after recording) |
|
What is the most important thing when recording with clients? |
To never lose your cool |