Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
33 Cards in this Set
- Front
- Back
What effect (increase or decrease) does closing the diaphragm have on resolution?
|
decrease
|
|
What effect (increase or decrease) does closing the diaphragm have on image contrast?
|
increase
|
|
The objective with a magnification power of 45X is referred to as ____ objective.
|
high dry
|
|
The objective with a magnification power of 10X is referred to as the ____ objective?
|
low power
|
|
Which three parts of the microscope contain lenses?
|
ocular
objectives condenser |
|
The objective with a magnification power of 100X is referred to as the ____ objective.
|
oil immersion
|
|
The part of the microscope that regulates the amount of light that reaches the slide is the _____.
|
diaphragm
|
|
How does using oil immersion enhance the resolving power of the microscope?
|
immersion oil prevents the scattering of light rays, allowing more light to reach the slide
|
|
If you are suing a 10X ocular and oil immersion objective, what is the total magnification power of the microscope?
|
1000X
|
|
If the total magnification power of your microscope is 50X and you are suing a 10X ocular, what is the power of the objective?
|
5X
|
|
Immersion oil must have the same refractive index as ____ to be of any value.
|
glass
|
|
What effect (increase or decrease) does closing the diaphragm have on brightness?
|
decrease
|
|
What is the resolution of a microscope increased by? 2
|
using blue light
raising the condenser to its highest point |
|
In general, at what position should the condenser be kept while viewing the slide?
|
highest
|
|
What characteristic of a microscope enables one to switch from one objective to another without altering the focus?
|
parfocalization
|
|
Substage filters should be of a ____ color to get the maximum resolution of the optical system.
|
blue
|
|
TRUE or FALSE
Eyepieces are of such simple construction that almost anyone can safely disassemble them for cleaning. |
False
|
|
TRUE or FALSE
Lenses can be safely cleaned with almost any kind of tissue or cloth. |
False
|
|
TRUE or FALSE
When swinging the oil immersion objective into position after using high-dry, one should increase the distance between the lens and slide to prevent damaging the oil immersion lens. |
False
|
|
TRUE or FALSE
Instead of first using the oil immersion lens, it is best to use one of the lower magnifications first and then swing the oil immersion into position. |
True
|
|
TRUE or FALSE
When the 100X objective is used, the main reason to place oil on the slide is to prevent the objective from cracking the slide. |
False
|
|
When changing from low power to high power, it is generally necessary to
(A) lower the condenser. (B) open the diaphragm. (C) close the diaphragm. (D) Both A and B. (E) Both A and C. |
B
|
|
Microscope lenses may be cleaned with
(A) lens tissue. (B) a soft linen handkerchief. (C) an air syringe. (D) both A and C. (E) A, B and C. |
A & C
|
|
Role of stage adjustment and stage adjustment knob?
|
clamping device used for holding and moving the slide arounf on the stage
|
|
How to determine the total magnification of a microscope?
|
mutliplying the power of the ocular lens times the power of the objective lens used
|
|
Role of the condenser?
|
collects and directs the light from the lamp to the slide being studied
|
|
Does the condenser affect magnifying power?
|
no
|
|
Role of diaphragm? 3
|
regulates the amount of light that reaches the slide
-improves contrast -reduces the numerical aperature |
|
What is the resolving power?
|
ability to completely seperate 2 objects
|
|
Resolving power formula?
|
d= .5(wavelength) / NA
|
|
What is the limit of resolution?
|
.2 micrometers
|
|
What 4 things maximize the resolving power?
|
-blue filter because of shorter wavelength
-condenser should be kept at its highest point -diaphragm should not be stopped down too much -immersion oil |
|
What is parafocal?
|
the image will remain in focus when changing from a lower power lens to higher power.
|