Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
20 Cards in this Set
- Front
- Back
|
Risk management principles should be applied to.. |
on- and off-duty activities to enhance the safety and well being of yourself and others |
|
|
What situation does NOT warrant prompt reporting to your supervisor? |
Using personal protective equipment |
|
|
Before removing a component from an air compressor, you must ensure |
all air pressure is drained |
|
|
Why should the frame of an electrical motor be grounded? |
To prevent current from following the path of least resistance. |
|
|
Which type of hammer should you use to avoid damaging driving materials? |
Soft face |
|
|
Which type of screwdriver has blades designed to lessen the possibility of the screwdriver from the screw head? |
Cross-point |
|
|
Which pliers should be used to hold odd-shaped objects? |
Multiple slip-joint |
|
|
Which pliers have a locking device to hold materials securely? |
Vice grips |
|
|
Diagonal cutting pliers are designed to cut |
small wire |
|
|
Before operating the pneumatic impact wrench, you must |
blow out the airhose |
|
|
Replacement hardware decisions on support equipment must be governed by |
servicibility criteria |
|
|
What type of bolt is typically used to connect accessories to an engine? |
Stud |
|
|
What type of nut should NEVER be used in areas where the temperature exceeds 250 degrees Fahrenheit? |
Nonmetallic self-locking nuts. |
|
|
What color code is used on pre-insulated terminal lugs for wire sizes 18 through 22? |
Red. |
|
|
What are the three different TYPES of terminal lugs? |
Straight, right angle, and flat. |
|
|
What does the "-4" identify in fitting part number MS20822-4D? |
Fitting size. |
|
|
What type of damage greatly reduces the ability of tubing to withstand internal pressure and vibration? |
Chafing. |
|
|
A flexible hose in a 3,000 psi system must be pressure tested to |
12,000 psi without bursting. |
|
|
When installing a flexible hose, you must provide slack or bend in the hose to |
compensate for change in length. |
|
|
How can people BEST prevent FOD? |
Learn the basic classes of FOD, recognize its causes, and account for tools and hardware use during maintenance. |
