Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
43 Cards in this Set
- Front
- Back
What is a fire detection system?
|
Detects hazardous conditions.
|
|
What is a fire suppression system?
|
Control or contain hazardous conditions.
|
|
What report was produced by the National Commission on Fire Prevention and Control?
|
America Burning
|
|
What are the basic categories of fire detection and suppression systems?
|
1. Automatic fire detection and alarm systems
2. Automatic fire suppression systems 3. Manual fire alarm systems 4. Manual fire suppression systems 5. Smoke control/exhaust systems |
|
What is a standard?
|
Models or examples of desired behaviors
|
|
What is a code?
|
A collection of rules and regulations.
|
|
What are the two ways that building and fire codes can be adopted?
|
Transcription: entire code is copied into regulation
Reference: code is referenced |
|
What organization publishes the majority of consensus standards used in the United States and Canada?
|
NFPA
|
|
What are three standard and code developing organizations?
|
1. NFPA
2. ICC 3. ASTM |
|
What are two benefits of fire detection and suppression systems?
|
1. reduce property loss
2. reduce deaths |
|
Why can firefighters benefit from residential sprinkler systems?
|
Offset risk of premature building collapse
|
|
What are the basic components of a fire detection and alarm system?
|
1. Fire Alarm Control Panels
2. Primary Power Supply 3. Secondary Power Supply 4. Initiating Devices 5. Notification Appliances |
|
What is an alarm signal?
|
Notifies occupants in local area
|
|
What is a supervisory signal?
|
Notifies of a off-normal condition in system
|
|
What is a trouble signal?
|
Indicates a problem with a monitored circuit
|
|
What are the three basic types of protected premises alarm systems?
|
1. Local Alarm system: notified people in area
2. Noncoded Alarm: alarm could be anywhere 3. Zoned/annuciated alarm: visibly indicates where alarm sounded |
|
What are the types of supervising station alarm systems?
|
1. Auxiliary alarm system: connects to fire dept
2. Proprietary system: connects to property owner 3. Central station system: connects to commercial monitoring center 4. Remote receiving systems: alarms at communications center |
|
What is the purpose of an emergency communications system?
|
Provide reliable communication system for residents and firefighters
|
|
What are the main types of fixed-temperature heat detection devices?
|
1. Fusible Link/frangible bulbs
2. bimetallic 3. continuous line |
|
What is the difference between a photoelectric smoke detector and an ionization smoke detector?
|
Photoelectric: use light to detect smoke
Ionization: uses radioactive source to monitor |
|
What by-products of fire are released by all carbonaceous materials that burn?
|
1. water
2. carbon monoxide 3. carbon dioxide |
|
What is the difference between acceptance testing and periodic or service testing?
|
Acceptance Testing: after suppression system is installed
Service Test: yearly tests/after repair |
|
What are some of the types of documents and records that should be maintained for record keeping?
|
Reports, forms, letters, violation notices, plan-review comments
|
|
What is the stack effect?
|
Strong air draft going from ground level to roof.
|
|
How can HVAC systems contribute to smoke movement through a building?
|
Air can be recirculated throughout the building through HVAC system
|
|
What are three hazardous products of combustion?
|
1. Heat
2. Smoke 3. Light |
|
What is the purpose of a smoke management system?
|
Reduce occupant deaths/injuries and aid firefighters by removing smoke
|
|
What are some different strategies for smoke control?
|
1. passive: compartmentation
2. pressurization 3. exhaust. 4. opposed airflow 5. dilution 6. zoned |
|
What is the difference between dedicated and nondedicated smoke control systems?
|
dedicated: those intended for smoke control
nondedicated: share components with HVAC |
|
How do positive pressure smoke control systems work?
|
supplies air to zones adjacent to the zone of the fire's origin
|
|
What is the purpose of a firefighters’ smoke control station (FSCS)?
|
provides full monitoring and manual control over all smoke-control systems/equipment
|
|
What are the three types of testing for smoke control systems?
|
1. acceptance testing
2. periodic performance testing 3. automatic component testing |
|
Why should pre-fire planning and fireground operations consider smoke management systems?
|
Firefighters must realize capabilities/limitations of these systems to do their job
|
|
What are the classifications of portable fire extinguishers?
|
A: Ordinary
B: liquids/gasses C: electrical D: metals K: cooking |
|
What is the symbol system most widely used on portable fire extinguishers?
|
Pictorial
|
|
What are the ratings of portable fire extinguishers based upon?
|
Intended use and fire-fighting capability on five classes of fire
|
|
What types of agents are used in portable fire extinguishers?
|
water/afff/fffp/carbon dioxide/halons/dry chemicals/sodium bicarbonates/etc
|
|
What are the methods used to expel the extinguishing agent in portable fire extinguishers?
|
stored pressure
cartridge-operated pump-operated |
|
What standard contains information on the selection and distribution of portable fire extinguishers?
|
NFPA 10
|
|
What are factors to consider in properly placing portable fire extinguishers?
|
visible/well signed
not blocked near agree/ingress near normal paths of travel |
|
What are items to check during a monthly inspection of portable fire extinguishers?
|
proper location
access inspection tag horn or nozzle lock pins signs of damage pressure gauge applicability |
|
What is hydrostatic testing?
|
ensures that extinguisher is strong enough to withstand pressures
|
|
What are the steps in PASS?
|
Pull
Aim Squeeze Sweep |