Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
19 Cards in this Set
- Front
- Back
|
What makes the surface slip resistant? |
Sole-gripping dimples |
|
|
3 options of grate lock |
With dimples, without dimples, solid deck |
|
|
Minimum bearing surface |
1-1/2" 2-1/2" when using hold down clip |
|
|
Grate lock widths |
6",9",12"
|
|
|
Special note about 1-1/2" deep grate lock |
No return going upward |
|
|
1-1/2" deep return length |
13/16" |
|
|
Dimple height |
.080" |
|
|
Used gauges with grate lock |
14, 18 16 on special order |
|
|
What lengths are available in 1-1/2" deep |
12' only |
|
|
Smooth grate lock prefix |
MS |
|
|
Grate lock depths |
1-1/2", 2-1/2", 3", 4" |
|
|
Callout- 12" wide, 18 gauge. 3" depth, male/female |
MG-123018-FM |
|
|
Return length- 2-1/2" depth |
1-3/16", 1" upturn same for 3" and 4" deep |
|
|
Available lengths- 2-1/2" deep |
12, 20, 24 |
|
|
Solid deck available depths |
1-1/2", 2-1/2" |
|
|
Solid deck gauge |
14 |
|
|
Hold down clamp callout What accessories needed |
RTM-SW 5/16" hex head cap screw-1" longer than channel washer and hex nut
|
|
|
Hold down clip callout |
M-HC-depth (i.e. 25 for 2-1/2") includes clip, no 1/4" self tapping screws |
|
|
Anchor J Bolt callout for grate lock |
M-250-J includes bolts, washers,nuts |
