Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
83 Cards in this Set
- Front
- Back
Century when the Philippines took its first step in the Plumbing profession |
17th Century |
|
__________ was set during the 17th Century by the Spaniards as the model community using European Standard for plumbing installations |
Walled City or Intramuros |
|
In 17th century, during the arrival of the _______ professionals, Governor General _________ issued a letter of instruction on proper waste disposal on all communities. |
American, Harrison |
|
In the year _____, the Plumbing trade was recognized setting ______ as model community. |
1902, Manila |
|
In 1902, Master Plumber ______ was assigned as the first chief of the division of plumbing construction and inspection. |
John F. Haas |
|
In 1935, _____ was organized initiating the Manila ordinance 2411 or the _______ placed under the Department of Public Services in Manila. |
National Master Plumbers Association of the Philippines(NAMPAP), Plumbing Code of the City of Manila. |
|
In 1954, RA ____ known as the ____ Law of the Philippines signed by President Ramon Magsaysay on June ___, 19__. |
1378, Plumbing, 18,55 |
|
In 1959, the ____ of the Philippines prepared by NAMPAP was promulgated & approved by Malacañang on January __, 1959. |
National Plumbing Code, 28. |
|
The National Plumbing Code of the Philippines assisted the passage of the law creating _______ and was made a referral code of RA ___ otherwise known as the Building Code of the Philippines. |
National Waterworks & Sewerage Authority (NAWASA), 6541 |
|
In __ was the revision of the National Plumbing Code of 1999 spearheaded by NAMPAP President ______. |
1996, Jaime Cabase |
|
In ____, PRC adopted the Revised Plumbing Code of 1999 approved last __ _, 1999 pusuant to Section _ of RA ____ known as the ____. |
October 1999, December 21, 4, 1378, Plumbing Law of the Philippines |
|
Basic Principle No. 1 |
All premises intended for human habitation, occupancy, or use shall be provided with a supply of pure and wholesome water, neither connected with unsafe water supplies nor subject to hazards of backflow or back-siphonage. |
|
Basic Principle No. 2 |
Plumbing fixtures, devices and appurtenances shall be supplied with water in sufficient volume and at a pressure adequate to enable them to function satisfactorily and without undue noise under all normal conditions of use. |
|
Basic Principle No. 3 |
Plumbing shall be designed and adjusted to use the minimum quantity of water consistent with proper performance and cleaning. |
|
Basic Principle No. 4 |
Devices for heating and storing water shall be so designed and installed to prevent dangers from explosion through overheating. |
|
Basic Principle No. 5 |
Every building having plumbing fixtures installed and intended for human habitation, occupancy or use on premises abutting on a street, alley or easement where there is a public sewer, shall be connected to the sewer system. |
|
Basic Principle No. 6 |
Each family dwelling unit on premises abutting on a sewer or with a private sewage-disposal system shall have at least one water closet and one kitchen-type sink. Further, a lavatory and bathtub or shower shall be installed to meet the basic requirements of sanitation and personal hygiene. |
|
Basic Principle No. 7 |
Plumbing Fixtures shall be made of smooth non-absorbent material, free from concealed fouling surfaces and shall be located in ventilated enclosures. |
|
Basic Principle No. 8 |
The drainage system shall be designed, constructed and maintained to safeguard against fouling, deposit of solids, clogging and with adequate cleanouts so arranged that the pipes may be readily cleaned. |
|
Basic Principle No. 9 |
All pipings of plumbing systems shall be of durable NAMPAP approved materials, free from defective workmanship, designed and constructed by Registered Master Plumbers to ensure satisfactory service. |
|
Basic Principle No. 10 |
Each fixture directly connected to the drainage system shall be equipped with a water-sealed trap. |
|
Basic Principle No. 11 |
The drainage piping system shall be designed to provide adequate circulation of air free from siphonage, aspiration or forcing of trap seals under ordinary use. |
|
Basic Principle No. 12 |
Vent terminals shall extend to the outer air and installed to preempt clogging and return of foul air to the building. |
|
Basic Principle No. 13 |
Plumbing systems shall be subjected to such tests effectively disclose all leaks and defects in the workmanship. |
|
Basic Principle No. 14 |
No substance which will clog the pipes, produce explosive mixture, destroy pipes or their joints or interfere unduly with the sewage-disposal process shall be allowed to enter the building drainage system. |
|
Basic Principle No. 15 |
Proper protection shall be provided to prevent contamination of food, water, sterile goods and similar materials by backflow of sewage. When necessary, the fixture, device or appliance shall be connected indirectly with the building drainage system. |
|
Basic Principle No. 16 |
No water closet shall be located in a room or compartment which is not properly lighted and ventilated. |
|
Basic Principle No. 17 |
If water closets or other plumbing fixtures are installed in buildings where there is no sewer within reasonable distance, suitable provision shall be made for disposing of the building sewage by some accepted method of sewage treatment and disposal, such as septic tank. |
|
Basic Principle No. 18 |
Where a plumbing drainage system may be subjected to backflow of sewage, suitable provision shall be made to prevent its overflow in the building. |
|
Basic Principle No. 19 |
Plumbing systems shall be maintained in serviceable condition by Registered Master Plumbers. |
|
Basic Principle No. 20 |
All plumbing fixtures shall be installed properly spaced, to be accessible for their intended use. |
|
Basic Principle No. 21 |
Plumbing shall be installed by registered master plumbers with due regard to the preservation of the strength of structural members and the prevention of damage to walls and other surfaces through fixture usage. |
|
Basic Principle No. 22 |
Sewage or other waste from a plumbing system which may be deleterious to surfaces or sub-surface waters shall not be discharged into the ground or into any waterway, unless first rendered innocuous through subjection to some acceptable form of treatment. |
|
CODE OF |
ETHICS |
|
1 |
Act in an unprofessional manner and demand any remuneration other than his/her original charges except for additional services not covered in his basic contract |
|
2 |
Supplant another Registered Master Plumber after definite steps have already been taken toward his/her being commissioned to perform the contract |
|
3 |
Underbid another registered master plumber by reducing his/her professional fees after being informed of the fees charged by the other master plumber |
|
4 |
Take the advantage of a salaried government position to compete unfairly with practicing registered master plumber |
|
5 |
Allow the use of his/her license as registered master plumber for a fee to an unlicensed master plumber in plumbing works without his/her personal supervision |
|
6 |
Injure falsely or maliciously, directly or indirectly, the reputation of another registered master plumber by reviewing his/her work for the same client unless professional services of the former have been officially terminated and all professional fees have been fully paid by the client |
|
7 |
Advertise in self-laudatory language, act in any manner and engage in any practice which tends to bring dishonor to the dignity of the registered master plumber, the National Master Plumbers Association of the Philippines (NAMPAP) and the plumbing profession |
|
Plumbing Permit Requirements |
1. Plumbing work coverage 2. Description of the land 3. Indicate the use or occupancy 4. Plans, drawings, diagrams, computations, technical specifications and other pertinent data 5. Signed by owner and permittee 6. Sign and sealed by licensed master plumber |
|
6 sets of plans will be distributed to: |
1. 2 for Administrative Authority 2. 2 for Applicant 3. 2 for the Owner 4. 1 at jobsite |
|
For complicated plumbing systems, administrative authority may issue ____. |
Partial Permits |
|
Permit may expire or null if: |
1. Plumbing work was not commenced within one year from the date of issuance 2. Plumbing work was suspended or abandoned at any time after having been commenced for a period of 120 days. |
|
Renewal will require to settle a fee __ of the amount paid from the initial application of permit. |
One-half |
|
Master Plumber's Seal |
-shall be round in shape - "Registered Master Plumber" at the upper portion of the round seal - Name of the Licensed Master Plumber at the upper center - Registered number of the registered master plumber shall appear at the center below the name -"Philippines" appearing at the lower portion of the round seal |
|
Plumbing |
Terms |
|
ABS |
Acrylonitrile Butadiene Styrene |
|
AIRBREAK |
Physical separation, which may be a low inlet into the indirect waste receptor from the fixture, appliance or device indirectly connected |
|
AIRGAP, DRAINAGE |
The unobstructed vertical distance through the free atmosphere between the lowest opening from any pipe, plumbing fixture, appliance, or appurtenance conveying waste to the flood level rim of the receptor |
|
AIRGAP, WATER DISTRIBUTION |
An unobstructed vertical distance through the free atmosphere between the lowest opening from any pipe or faucet conveying potable water to the flood-level rim of any tank, or fixture |
|
Apprentice Plumber |
An entry level plumber learning the trade. |
|
Area Drain |
A receptor designed to collect surface or storm water from an area |
|
Aspirator |
A fitting or device supplied with water or other fluid under positive pressure which passes through an integral orifice constriction, causing a vacuum. |
|
Backflow |
The flood of water or other liquids, mixtures or substances into the distributing pipes of a potable supply of water from any source other than from its intended source |
|
Backflow Connection |
Condition or any arrangement whereby reverse flow can occur |
|
Backpressure backflow |
Occur due to an increased reverse pressure above the supply pressure |
|
Backflow preventer |
Device or means to prevent flow of liquid from returning to the source of supply. Also called vacuum breaker |
|
Back siphonage |
Flowing back of used, contaminated or polluted water from a plumbing fixture or vessel into a water supply pipe due to a negative pressure in such a pipe |
|
Backwater valve |
A device installed in a drainage system to prevent reverse flow |
|
Backvent Pipe |
The part of a vent line, which connects directly with an individual trap underneath or behind the fixture and extends to the branch or main vent pipe at any point higher than the fixture traps it serves. Sometimes called an individual vent. |
|
Ball cock |
A valve opened and closed by the fall and rise, respectively, of an attached ball floating on the surface of the liquid |
|
Ball joint |
A type of pipe connection in which a ball-shaped is held in a cuplike shell and allows movement in every direction |
|
Bathroom |
A room equipped with shower stall pr bath tub |
|
Full Bath |
Contains lavatory, toilet, shower stall and bathtub |
|
3/4 Bath |
Contains lavatory, toilet, and shower stall |
|
1/2 Bath |
Contains lavatory and toilet |
|
1/4 Bath |
AKA powder room, consisting of either toilet or shower |
|
Battery of Fixtures |
Any group of two or more similar adjacent fixtures which discharge to a common horizontal waste or soil branch |
|
Bell or Hub |
That portion of a pipe which, for a short distance, is sufficiently enlarged to receive the end of another pipe of the same diameter for the purpose of making a caulked or push-on joint |
|
Bending Pin |
A tool for straightening or bending lead pipe |
|
Bibb |
Synonymous with faucet, cock, tap, plug |
|
Bidet |
A plumbing fixture used for washing the middle private part of the body, especially the genitals. Also called "sitz" bath |
|
Blank flange |
A pipe flange that is not drilled for bolt holes |
|
Blind flange |
A flange that closes the end of a pipe. There is no opening for the passage of liquid or gas |
|
Blow-off |
A controlled outlet of a pipeline to discharge liquid or dentritus |
|
Boiler Blowoff |
A valved outlet of a boiler that permits discharge of accumulated sediment |
|
Branch |
Any part of the piping system other than the main, riser or stack |
|
Branch Interval |
A length of soil or waste stack corresponding in general to story height, but in no case less than 2.43 meters within which horizontal branches from one floor or story of a building are connected to the stack |
|
Branch Vent |
A horizontal vent connecting one or more individual vertical back vents with the vent stack or stack vent |
|
Brazed Joint |
Any joint obtained by joining of metal parts with alloys which melt at temperatures higher than 449 degrees centigrade, but lower than the melting temperatures of the parts to be joined |
|
Building Drain |
That part of the lowest horizontal piping of a drainage system which receives discharge from soil, waste and other drainage pipes inside the walls of a building and conveys it to the building sewer beginning 0.6 meters outside the building wall |