Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
31 Cards in this Set
- Front
- Back
what is the name of manual NAVEDTRA 12085?
|
Use and Care of Hand Tools and Measuring Tools
p.1-1 |
|
what must be in place before cutting tools are used?
|
safety glasses
p.1-1 |
|
what should never be used for general maintenance?
|
crash tool roll kit
p.1-1 |
|
what manual should you seek for safety precautions as well as the manufacture's safety precautions?
|
OPNAVINST 5100.19
p.1-1 |
|
what are the main parts that make up the construction of the standard screwdriver?
|
1)the handle
2)the shank 3)the end p.1-1 |
|
what part of the standard screwdriver is the blade?
|
the end
p.1-1 |
|
what is the proper fit for a standard screwdriver?
|
at least 75%
p.1-1 |
|
what is the proper fit for a phillips head screwdriver?
|
100%
p.1-1 |
|
are reed and prince screwdrivers interchangeable with Phillips screwdrivers?
|
reed and prince screwdrivers are not interchangeable with phillips screwdrivers
p.1-1 |
|
how many degrees are the flukes of the phillips screwdrivers?
|
about 30*
p.1-4 |
|
how many degrees are the flukes of the reed and prince screwdrivers?
|
about 45*
p.1-4 |
|
between the phillips and reed and prince screw slot which is the deepest?
|
the reed and prince is deeper than the phillips screw slot
p.1-4 |
|
what type of end does the reed and prince and the phillips screwdriver have?
|
reed and prince=blunt end
phillips=shaper, pointed end |
|
the outline of the end of which screwdriver is approximately a right angle?
|
reed and prince screwdriver
p.1-4 |
|
which pliers are manufactured with straight serrated jaws for gripping objects?
|
combinations jaw pliers
p.1-4 |
|
what type of screws are generally used for airframe structural applications?
|
the Reed and Prince screws
p.1-4 |
|
what type of screws are generally used for component assemblies?
|
the Phillips screws
p.1-4 |
|
what type of pliers are manufactured with straight serrated jaws for gripping objects?
|
combination jaw pliers
p.1-4 |
|
what type of pliers are designed specifically for cutting?
|
diagonal pliers
p.1-4 |
|
what tool is often referred to as "knuckle busters"?
|
the crescent adjustable wrench
p.1-4 |
|
when using the crescent adjustable wrench, in what direction should the force be exerted?
|
pull the handle toward the side having the adjustable jaw
p.1-4 |
|
what is the most common adjustable pipe wrench?
|
the Stillson
p.1-4 |
|
when using the Stillson wrench which jaw should provide the twisting force?
|
in such a manner that the fixed jaw provides the twisting force
p.1-4 |
|
on soft metal such as brass or on chromium-plated or machined surfaces what type of wrench should be used?
|
the strap wrench
p.1-4 |
|
wht hammer is most used by the ABH?
|
the ball peen
p.1-4 |
|
what tool is a portable metal cutting tool that can be used for cutting sheet metal, bolts, and pipes?
|
the hacksaw
p.1-4 |
|
on what stroke does the hacksaw cut?
|
on the push stroke only
p.1-4 |
|
the blade a hacksaw should be installed in what manner?
|
in the frame with the teeth facing away from the handle
p.1-4 |
|
what type of tool is is designed for prying boards from crates, pulling spikes or heavy nails, and as a lever for moving heavy objects short distances?
|
wrecking bars
p.1-5 |
|
which wrecking bar is used for damage control functions as well as on crash trucks on shore stations?
|
the Johnson bar
p.1-5 |
|
what tool is sometimes called the all-purpose tool?
|
the wrecking bar
p.1-5 |