Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
23 Cards in this Set
- Front
- Back
what NDE method will most likely use a transducer to scan for flaws |
Ultrasonic Testing |
|
with respect to the rolling direction of steel plate manufacture, what statement is true |
the strength is greatest in the "X" direction |
|
which NDT is truly a volumetric test method |
Ultrasonic Testing |
|
the detection of surface flaws, both AC & DC methods, the detection of surface flaws tightly closed by carbon, slag, or contaminants, the fact that it is faster than PT |
Magnetic Particle Examination |
|
side wall incomplete fusion at a bevel angle of 35° will not easily be detected using what NDE method when it is perpendicular to the weld centerline |
Radiographic Examination |
|
the presence of paint on the surface of a part will most greatly affect the results of which NDE method |
liquid penatrant and magnetic particle examination |
|
what is considered to be the most portable method of magnetization when conducting a magnetic particle test |
AC yoke |
|
what magnetic particle test technique could be used for the discovery of longitudinal flaws on a pipe using a stationary MT machine or bench unit? |
circular magnetization |
|
heat treatment conditions can be determined using which NDE process |
electromagnetic Examination (ET) |
|
ultraviolet light may be used with which NDE methods |
Magnetic Particle examination & Liquid Penetrant examination |
|
the orientation of the probing energy source with respect to that of a flaw is considered to be a significant variable for which NDE method |
RT, UT, ET, MT |
|
LT is the abbreviation for |
Leak Testing |
|
what flaw is most likely to be caused during the manufacturing of steel |
Lamination |
|
•materials conductivity •materials hardness •a thin materials thickness •a materials heat treatment can be detected using what NDE method |
Electromagnetic Examination |
|
NDE technicians are usually qualified in accordance with the requirements of |
ASNT SNT-TC-1A |
|
which material will result in the darkest radiograph |
aluminum |
|
•extent of welding •final weld appearance •dimensional accuracy •amount of distortion are all monitored using what NDE process |
Visual Examination |
|
A wire IQI is used in which NDE method |
Radiographic Examination |
|
when a metal is alloyed how are the atoms of the alloy incorporated into the original metal lattice structure |
substitutionally or interstitially |
|
decibel is a term associated with which NDE method |
Ultrasonic Examination |
|
Electrical conductivity of a part is the primary requirements for which NDE method |
Electromagnetic Examination |
|
Piezoelectricity is a material property used by which NDE method? |
Ultrasonic Examination |
|
Hydrogen in the molten weld metal can cause |
cracking ans porosity |