Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
14 Cards in this Set
- Front
- Back
When looking at the common fraction 6/100, its equivalent decimal fraction is |
0.060 |
|
Converting 3.3 cm to inches would give the result |
1.259 in |
|
Repeatability is a test of accuracy, not precision |
False |
|
Converting 4 inches into millimeters would give the result |
101.6 |
|
A measurement can be defined as a comparison process where an unknown quantity is compared to a known quantity |
True |
|
Values greater than or equal to 1 are called |
whole numbers |
|
The smallest division of an instruments scale that can be read reliably is called |
discrimination |
|
If we were to express 12,000 millimeters into meters, the result would be |
12 |
|
A typical dial or digital caliper can measure outside, inside and depth features of an object. |
True |
|
When prints have both customary and metric units included on the dimensioning it is called |
dual dimensioning |
|
kilometer is equal to 1000 meters |
True |
|
If we were to express 6 meters into centimeters, the result would be |
600 |
|
On an inch micrometer, the barrel scale is graduated by ___ per division. |
0.025 in |
|
Finer the resolution on a gauge device, the smaller the range of movement. |
True |