Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
20 Cards in this Set
- Front
- Back
What must be set to import geometry into the proper WCS orientation? |
Construction and tool plane equal to the WCS |
|
How do you suppress fillets in a solid when there is no history? |
Remove solid fillets |
|
Why would you analyze inner radii on your model? |
To ensure the finish tool will fit |
|
Which toolpath is a good choice for milling larger holes? |
Circle mill |
|
Why is it important to name toolpath groups logically? |
All of the above |
|
What is a primary benefit of importing operations? |
Reuse proven toolpaths |
|
Which command converts a solid to a brick? |
Remove solid history |
|
Which options should you select on the Lead in/out page when including points in your chain selection? |
Use entry point, use exit point |
|
What happens when an imported operations work offset is already in use? |
The work offset is reassigned |
|
What is an important feature of FBM, even if you don't use it to generate toolpaths? |
2D boundary creation |
|
What page do you use to set a range in a waterline toolpath? |
Steep/shallow |
|
What is the easiest way to machine a fillet on a solid model using FBM? |
Eliminate the fillet and use a tool with the original radius |
|
How do you change the parameters of multiple toolpath operations at the same time? |
Edit common parameters |
|
Which drill cycle do you select to cut to the final depth in increments? |
Peck drill |
|
What key or keys do you hold to select multiple operations? |
Shift or control |
|
What is a bounding box used for? |
Determining the boundaries of your part |
|
What corner type do you select if you want a sharp corner created with your slot mill tool? |
none |
|
What is the biggest problem for creating toolpaths on solid models?
|
Determining the boudries |
|
How do you get Verify to present a cleaner image? |
Increase the precision |
|
What is generally the most efficient way to group transform operations? |
By tool size |