Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
11 Cards in this Set
- Front
- Back
What is the purpose of the power transfer method of transferring fuel on a fighter aircraft? |
Augment fuel transfer and scavenge the tank |
|
How many fuel pumps are used in a fighter aircraft power transfer system? |
6 |
|
What fuel tank will transfer it's fuel first on a fighter aircraft? |
External centerline |
|
You are troubleshooting a problem on a fighter aircraft. You find none of the external tanks transferred fuel with the selector in the NORM position; however, the external wing tanks did transfer fuel with the select switch in the WING FIRST position. The most probable cause for this is.. |
Centreline refuel/transfer valve is inoperative. |
|
How is the fuel level control valve on a cargo aircraft operated and controlled respectively? |
Hydro mechanically/ solenoid |
|
What cargo aircraft component is designed to sense fuel pressure and transmit a signal to an indicator on the fuel management panel to allow determination of the boost pump output pressure? |
Pressure transmitter |
|
Which indication shows that a boost pump on a cargo aircraft is putting out sufficient pressure? |
PRESS LOW light goes off |
|
To prevent the introduction of FO into the fuel transfer system of a cargo aircraft the jettison mast is equipped with a... |
Flame arrestor screen |
|
Which type of fuel valves control the flow of fuel through the jettison system? |
Dump valve |
|
What safety feature in the bomber aircraft fuel jettison system prevents the accidental loss of fuel while the aircraft is on the ground? |
The landing gear must be in the airborne position |
|
In addition to the dump valve, which valve(s) on a bomber aircraft must be open to allow fuel into the wing transfer lines to be dumped overboard? |
Ballast tank isolation valve |