Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
39 Cards in this Set
- Front
- Back
How is a rollover cable pinned? |
1 to 8, 2 to 7, 3 to 6, 4 to 5 |
|
What connector does the serial end of a rollover cable use? |
db-9 |
|
What are the full parameters for the terminal emulator program? |
9600 bs, no hardware flow control, 8 bit ascii, no parity bit, 1 stop bit |
|
What command & keyboard shortcut goes strait to enable mode? |
end or ctrl z |
|
What type of memory stores IOS? |
flash |
|
What type of memory stores the bootloader? |
rom |
|
What type of memory stores startup-config? |
nvram |
|
what type of memory stores running-config? |
ram |
|
What 4 ways erase running-config? |
write erase, erase nvram, erase startup-config, delete startup config |
|
What type of encryption does secret 5 use? |
md5 hash |
|
what type of encryption does secret 4 use? |
sha-256 |
|
what service can you enable to encrypt passwords? |
service password-encryption |
|
How do you generate ssh keys? |
crypto key generate rsa? |
|
what must be in place before keys can be generated? |
domain-name |
|
How can you disable ssh or telnet on a given line? |
transport input |
|
What type of database can credentials be stored in remotely? |
AAA |
|
What protocol transports AAA requests? |
tacacs or radius |
|
How do you set which version of ssh to use? |
ip ssh version 2 |
|
What command shows info about ssh server? |
show ip ssh |
|
What command shows info about ssh clients connected? |
show ssh |
|
In what order are banners displayed? |
MOTD first, Login second, then the login, then exec |
|
How can you view command history buffer? |
show history |
|
How do you set history size per history? |
history size |
|
How can you turn on/off log messages from being displayed onc onsole? |
logging console |
|
how to put log messages at the end of output? |
logging synchronous |
|
How to set timeout time on a given line? |
exec-timeout |
|
What key combo redisplays the screen? |
ctrl-r |
|
What is the default speed, duplex & vlan for all interfaces? |
speed auto, duplex auto, switchport access vlan 1 |
|
How can you see what ip address the SVI on a switch has? |
show interface vlan * |
|
How can you see dhcp lease info? |
show dhcp lease |
|
What other switchport setting must be set to enable port-security on a given interface? |
access or trunk, not dynamic |
|
How many mac addresses are available by default and what violation action is set by default on port security? |
1, shutdown |
|
What are the 3 possible violation options? |
shutdown, restrict, protect |
|
what command turns on port-security? |
switchport port-security |
|
How to change number of allowed macs? |
switchport port-security maximum |
|
How to change violation action? |
switchport port-security violation? |
|
How to add a specific mac to port-security? |
switchport port-security mac-address |
|
How to set to sticky? |
switchport port-security mac-address sticky |
|
What command shows all port-security settings? |
show port-security *interface* |