Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
3 Cards in this Set
- Front
- Back
Asbestos removal that require a license |
• removing sprayed coatings • removal or other work which may disturb pipe lagging • any work with loose fill insulation • work on billboard • cleaning up large quantities of loose fine debris containing ACM. where the control limit will be exceeded • work on AIB where the risk assessment indicated that it will not be of short duration |
|
Asbestos work that not usually require a licence |
• small shirt maintenance tasks where the control limits will not be exceeded • removing textured decorative coatings by any suitable dust reducing method • cleaning up small quantities of loose/ fine debris containing ACM ( where the work is sporadic and of low intensity, the control limit will not be exceeded and is short duration work) • work on asbestos cement products or other materials containing asbestos. Where the fibres are bound in the matrix which prevents them being released. • work associated with collecting and an6 samples to identify the presence of asbestos |
|
Airborne rates for asbestos |
Maximum level of asbestos over a ten minute period is 0.6 f/cm3. Any exposure that would and could be deemed sporadic or of low intensity For A rehabilitation certificate to be issued the level should be no more than 0.1 f/cm3. |