Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
15 Cards in this Set
- Front
- Back
What is the LOW frequency range for the USN 52?
|
0.3 MHz to 4.0MHz
|
|
What is the BB frequency range for the USN 52?
|
0.4 MHz to 10.0 MHz
|
|
What is the DIN frequency range for the USN 52?
|
2.0 MHz to 8.0 MHz
|
|
What is the HIGH frequency range for the USN 52?
|
3.0 MHZ to 10MHz
|
|
the usn-52 has an inspection range of?
|
0.2 to 200 inches in steel
|
|
What type of screen does the usn-52 have and what are the power requirements?
|
electroluminescent display
110-220 vac 50-60hz or 6 D-size Nicad lead acid or alkaline batt |
|
The usn-52 weight how much?
|
5.98lbs with batt and 3.1 without
|
|
The MXU-715/E has a freq range of?
|
1.0 MHz to 15 MHz (step-able)
|
|
the MXU-715/E has a inspection range of?
|
0.1 to 150 inches in steel
|
|
How much does the MXU-715/e weight and what are the power requirements?
|
45 lbs
115/120 vac 60hz or 24 DC battery |
|
What is the thickness measurement range for the Nova 200MA
|
.008 to 20 inches
|
|
What are the power requirements for the NOVA 200MA
|
five 1.5 DC nicad batteries or 115 VAC 60Hz
|
|
For the Nova 200MA thickness gauge controls what is the ranges for M1?
|
200 mil range for material .008" to .200" using a 15 MHz transducer
|
|
For the Nova 200MA thickness gauge controls what is the ranges for M2?
|
2.0" range for materials .062" to 2.0" using 5 MHz transducer
|
|
For the Nova 200MA thickness gauge controls what is the ranges for M3?
|
20.0" range for materials .30" to 20.00" using a 2.25 MHz transducer
|