Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
100 Cards in this Set
- Front
- Back
What is the primary method used to ensure the widest dissemination of maintenance cross-tell information to highlight trends or safety conditions?
|
DMS
|
|
An Intermediate Repair Enhancement Program (IREP) meeting is heald at least
|
quarterly
|
|
What off-equipment level of maintenance consists primarily of testing and repair or replacement of component parts?
|
Intermediate
|
|
What type of maintenance is a hybrid of three-level maintenance (3LM) and two-level maintenance (2LM) that combines intermediate level maintenance from multiple bases at one location?
|
Regional Repair Center
|
|
Regarding the Reliability and Maintainability Program, who is responsible for deveolping a proactive program to analyze collected data and act accordingly to implement solutions for those systems under their control?
|
Single Mangers
|
|
Who is responsible for co-charing Product Improvement Working Group meetings with the lead command executive agent?
|
Single Manager
|
|
What level of Operating Instructions (OI) is published when responsibilities apply to both the operations group and Maintenance Group (MXG)?
|
Wing
|
|
Who does the Office of Primary Responsibility (OPR) designate to meet daily responsibilities for administering an Operating Instruction (OI)?
|
Point of Contact (POC)
|
|
Which MXG organization acts as the OPR for maintenance policy guidance as it pertains to Operating Instructions (OIs)?
|
Quality Assurance
|
|
What type of support agreement is developed when two or more branches of the military are involved?
|
Inter-Service
|
|
What is a general rule you should follow while developing support agreements?
|
It should cover only one receiver
|
|
Once a formal aircraft modification proposal has been submitted, who-in addition to the single point manager and the lead command configuration review board - must approve it?
|
HQ/USAF/A4M
|
|
In addition to the MAJCOM system functional manager, who is consulted on disposition instructions for a serially controlled item that does not have readable serial numbers?
|
Air Logistics Center item mangers
|
|
Historical aircraft records are normally centrally located within the possessing unit. Who, if anyone, way authorize the files to be decentralized?
|
MXG/CC
|
|
Who may authorize special application uses for the AFTO IMT 95?
|
MXG/CC
|
|
Which Air Force Material Command (AFMC) agency is the primary user of engine inventory management data entered into the Comprehensive Engine Management System?
|
Oklahoma City Air Logistics Center
|
|
Which Maintenance Group (MXG) section is responsible for leading the Data Integrity Team?
|
Maintenance Data System Analysis
|
|
What is the common standard interval used for calculating the Fix Rate on non-fighter type aircraft?
|
12 hours
|
|
How is an aircraft flight malfunction classified if an identical malfunction occurred on the same aircraft four sorties ago?
|
Recur
|
|
What maintenance priority designator is assigned to the repair of Aerospace Ground Equipment (AGE) needed to support primary mission aircraft within six work hours of a scheduled launch?
|
2
|
|
What maintenance priority designator is assigned to primary mission aircraft undergoing scheduled maintenance that if not accomplished would prevent or delay mission accomplishment?
|
3
|
|
What maintenance priority designator is assigned to non-primary mission aircraft undergoing extensive repair
|
5
|
|
Weekly maintenance scheduling meetings forecast and monitor maintenance requirments for the current month as well as how many months in the future?
|
2
|
|
In support of the weekly maintenance scheduling meeting, each aircraft maintenacne unit is required to provide a one-week forecast of all scheduled maintenance by 1600 on...
|
Friday
|
|
Who has sole responsibility and authority to develop and implement Minimum Essential System Listings (MESLs) for Research, Development, Test & Evaluation (RDT&E) missions and aircraft in support of RDT&E?
|
Air Force Materiel Command (AFMC)
|
|
What status is reported for an aircraft that has degraded system, subsystem, or component performance but is capable of full mission performance?
|
Fully Mission Capable (FMC)
|
|
What overall C-level is reported for a unit that possesses the required resources and is trained to undertake many, but not all portions of the wartime mission(s) for which it was organized or designed?
|
C-3
|
|
For a wing's Status Of Resources and Training System (SORTS) reporting, who monitors overall weapons load crew status and advises the Maintenance Group Commander (MXG/CC) when the number of fully certified crews falls below the minimum set limit?
|
Wing Weapons Manger
|
|
Who is responsible for the status of a unit's individual Unit Type Code (UTC) requirements as reported by the AEF-UTC Reporting Tool (ART)?
|
SQ/CC
|
|
When forecasting readiness for deployment in the AEF-UTC Reporting Tool (ART), an individual should consider how many months in the future?
|
6
|
|
The daily meeting to update the Wing Commander on maintenance issues is called?
|
Wing Standup
|
|
What are some of the wing commanders responsibilities?
|
-Managing the wing FOD program
-Establishing a CDDAR capability -Publishing operating instructions with specific responsibilities for applicalbe wing agencies |
|
What are some of the Maintenance Group Commanders responsibilities?
|
-Ensuring manpower is equitably distributed
-Ensuring strict adherence to technical data and management directives -Approving work schedules only when compatible with local environmental conditions |
|
Who is charged with overseeing the management of maintenance facilities and aircraft support equipment procurement and maintenance?
|
MXG superintendent
|
|
What are some of the Maintenance Group (MXG) superintendent's responsibilities?
|
-Act as liaison between staff and production supervisors
-Resolve conflicting maintenance requirements between units -Ensure maintenance training prorams meet the intent of HHQ instructions |
|
The Maintenance Group (MXG) superintendent is responsible for coordinating with unit leadership in rotating personnel between duty positions in order to...
|
develop individual experience and knowledge
|
|
If applicable, who is responsible for managing the squadron's flying crew chief porgram?
|
Squadron Commander (SQ/CC)
|
|
What are some of the Squadron Commanders (SQ/CC) responsibilities?
|
-Monitoring and reporting on mission capabilities
-Reviewing mobility, contingency, and exercise plans -Being legally accountable for squadron EPA compliance |
|
It is important for a Squadron Commander (SQ/CC) to review the squadron's Designed Operational Capability (DOC) statement to...
|
Determine if current squadron processes are adequate to meet all tasked requirements
|
|
What two positions make up what is known as maintenance operations-formerly known as maintenance supervision?
|
Operations officer/maintenance superintendent
|
|
Working together, the maintenance operations team is tasked with...
|
providing lower level administration for nearly all programs the SQ/CC is responsible for
|
|
Who is the Aircraft Maintenance Unit Officer In Charge (AMU/OIC) responsible for the leadership, supervision, and training of assigned personnel?
|
Squadron operations officer
|
|
What are some of the responsibiliteis of a AMU/OIC/superintendent?
|
-Reviewing pilot reported discrepancies daily
- Closely monitoring the flow of aircraft into major scheduled inspections -Ensuring suffcient numbers of aircraft engine run personnel are available |
|
Who is normally responsible for chairing the AMU's daily maintenance production meetings?
|
AMU/OIC
|
|
The main person responsible for monitoring, tracking, and documenting safety and health information about assigned workers is the
|
section NCOIC
|
|
What are some responsibiliteis of a section NCOIC?
|
-Enforcing strict adherence to technical data
-Monitoring the qualification and training of assigned personnel -Acting as the first-line manager and supervisor of maintenance production |
|
What are some of the AMU production superintendent's (Pro-super) responsibilities?
|
-Signing exceptional releases which clear aircraft to fly
-Directing the maintenance effort using available resources -Maintaining a current copy fo the on-base disaster map with a cordon overlay |
|
Who must the AMU production superintendent inform and coordinate with about the unit's maintenance effort, including providing aircraft status updates as required?
|
Maintenance Operations Center (MOC)
|
|
What individual is in the best position to ensure that maintainers accomplish maintenance IAW technical data and higher level directives?
|
Expediter
|
|
In manging, controlling, and directing resources to accomplish scheduled/unscheduled maintenance to generate aircraft, expediters work for the
|
production superintendent (pro-super)
|
|
What are some of the flightline expediter's responsibility?
|
-Ensuring ordered parts are picked-up quickly
-Maintaining copies of emergency action and functional checklists -Ensuring aircraft and equipment forms documentation is accurate and complete |
|
What are some of the sections that are part of the Maintenance Operations Flight (MOF)?
|
-Engine Mangement
-Maintenance Operations Center -Maintenance Data System Analysis |
|
What section is responsible for managing the Location subsytem of the IMDS-CDB for aircraft under its control?
|
Maintenance Operations Center (MOC)
|
|
What are some classes taught by the maintenance group's Maintenance Training Flight?
|
-Engine Run
-Borescope Operation -Engine Blade Blending |
|
Unit Training Managers (UTMs) are administratively assigned to the...
|
Maintenance Training Flight
|
|
The programs and Resources Flight is responsible for managing and controlling what IMDS-CBD subsytem for the maintenance group?
|
Maintenance Personnel
|
|
The Status of Resources and Training Systems (SORTS) data gathered and approved each month by the maintenance group is....
|
forwarded, and to be combined with other wing data
|
|
What does the Programs and Resources Flight maintain for the maintenance group?
|
Support agreements
|
|
Who is responsible for managing the Maintenance Standardization and Evaluation Program (MSEP) for the maintenance group?
|
Quality Assurance (QA)
|
|
When a case of aircraft chaffing is reported, what percentage of assigned like model aircraft must be inspected to determine if other aircraft are also experiencing the problem?
|
10 percent
|
|
Aircraft Maintenance Units (AMU's) must provide inputs to the maintenance group through the operations officer for the development of an annual maintenance plan to...
|
ensure maintenance capabilities are not exceeded and commitments can be met
|
|
In an Aircraft Maintenance Unit (AMU), who is primarily responsible for using fault reporting manuals to identify fault codes to aid maintainers in aircraft troubleshooting?
|
Debrief Personnel
|
|
What Landing Status Code (LSC) is recorded for an aircraft that experienced a ground abort?
|
Code 0
|
|
What are some of the positions assigned to the AMU Aircraft section?
|
-Flying crew chief
-Dedicated crew chief -Assistant dedicated crew chief |
|
Who must approve a waiver to allow maintenance personnel in non-crew chief AFSCs to be appointed as a Designated Crew Chief (DCC)?
|
Group Commander
|
|
What type of specialist is tasked to troubleshoot and repair aircraft interphone systems?
|
Avionics
|
|
Which of the following specialists is sometimes assigned to the speicalist section of an AMU?
|
Electronics Warfare
|
|
In squadron-sized fighter aircraft units, the AMU's Weapons section Maintenance element is sometimes combined with...
|
Armament flight in the Maintenance Squadron
|
|
Load crew chiefs are normally 2W1X1 AFSC NCOs with what skill level?
|
5 Skill level
|
|
On a weekly basis the AMU's PS&D section is required to provide a listing of scheduled maintenance job control numbers to
|
the Maintenance Operations Flight PS&D
|
|
The AMUs PS&D section reports directly to...
|
AMU supervision
|
|
The package that contains aircraft and maintenance historical documents is called the
|
aircraft jacket file
|
|
The AMU support section is usually responsible for...
|
-vehilces
-test equipment -technical orders |
|
Why is it important for support sections to standerdize procedures across the Aircraft Maintenance Squadron?
|
Secrurity, control, and accountability reason
|
|
What are some of the functions of the Accesssories Flight Fuel Systems section?
|
- Repairing fule tanks
-Inspecting hydrazine systems -Functionally checking fuel systems |
|
Who must the AGE flight commander/chief notify when mission essential AGE levels fall below a predetermined limit?
|
Maintenance Operations Center (MOC)
|
|
What section is responsible for performing minor maintenance on AGE and preparing AGE for deployment?
|
Servicing, Pickup, and Delivery
|
|
Who do AGE schedulers work for and report to on a daily basis?
|
Production Support section NCOIC
|
|
If a Cast is formed, what section normally assigns personnel to support the CAST?
|
Armament Support
|
|
What section is tasked with performing user calibration and maintenance on TMDE for the Armament flight?
|
Armament Support
|
|
A 2LM Avionics section is normally allowed to perform what type of repairs?
|
-Bench-check serviceability screening
-SRU cross-cannibalizations -TCTOs performed at wing level |
|
What avionics flight section is responsible for performing off-equipment maintenance on pressure altimeters, engine test cell instrumentation, INS, and navigation computers?
|
Guidance and Control Systems
|
|
If required, which Fabrication flight section is responsible for manufacturing and inspecting thermal radiation barriers and soundproofing materials?
|
Survival Equipment
|
|
Which section is part of the Maintenance Squadron's Maintenance flight?
|
Wheel and Tire
|
|
What Maintenance Flight section is often tasked with rigging and replacing landing gears and performing work that is beyond the capability of other activities?
|
Repair and Reclamation
|
|
If Munitions is not established as a Maintenance Squadron flight, it can be established as a...
|
separate squadron in the Maintenance Group
|
|
What section is responsible for assembling, disassembling, delivering, inspecting, and maintaining assigned MMHE for the Munitions flight?
|
Munitions Production
|
|
What section is responsible for providing broad control and support for all Munitions flight activities by planning, scheduling, coordinating, controlling, and directing their activities?
|
Munitions Systems
|
|
What Propulsion flight section processes supply requests, manages bench stock, and operates tool storage areas?
|
Support
|
|
What section is responsible for proper tracking and completion of TCTOs for the Propulsion flight?
|
Jet, Turbo-shaft Engine Intermediate Maintenance
|
|
What section is responsible for repairing, storing, and maintaining fuel nozzles, fuel mainfolds, oil pumps, afterburners, thrust reversers, and other engine components for the propulsion flight?
|
Module/Accessory Repair
|
|
What section is reponsible for performing in-labratory and on-site calibration and repair for the TMDE flight?
|
PMEL
|
|
What TMDE flight section contains the Customer Service element?
|
Production Control
|
|
For technical order related duties, the TMDE TODO/TODA person or section is responsible to the...
|
TMDE flight commander/chief
|
|
Where is the Ogden Air Logistics Center located?
|
Hill AFB
|
|
What agency provides management support for LANTIRN pods and system?
|
Warner Robins Air Logistics Center
|
|
Where is the AF Flight Test Center located?
|
Edwards AFB
|
|
The AF Flight Test center has played a major role in the test and development of every major weapon system in the AF inventory for how many years?
|
60
|
|
What are some unit components of the Air Armament Center?
|
-46th Test Wing
-96th Air Base Wing -377th Air Base Wing |
|
Where is the Aerospace Maintenance and Regeneration Center located?
|
Davis-Monthan AFB
|