Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
28 Cards in this Set
- Front
- Back
The loading limitations shall include 4 things
|
1. limiting mass
2. CoG`s 3. Mass distributions 4. floor loading |
|
For a CPL applicant who wants to practice his privaliges at night must have done
|
5 hours at night and 5 TO/Landings as PIC
|
|
A icense issued by a non JAA state may be rendered valid for use on AC registered in a JAA State at the disctretion of the authority of that member state for a period of no more THEN ONE YEAR and
|
the basic license remains valid
|
|
a controlled flight is to report to ATC if the TAS at cruising level varies by
|
5%
|
|
total estimated elapsed time is from
|
time of take off to overhead destination
|
|
Within uncontrolled airspace the first usable flight level in IFR must provided 500Ft margin above the following two levels
|
3000Ft & 1000AGL
|
|
a precision approach is a direct instrument approach using
|
azimuth,elevation,& dist infomation
|
|
What does the Abbreviation DER mean
|
Departure end of runway
|
|
a circling approach is a visual flight manoeurve keeping
|
the runway in sight
|
|
turning departures provide track guidance within
|
10Km
|
|
when establishing insrument departure procedures, the procedure assumes that the AC has a climb gradient of
|
3.3% with all Engines operative
|
|
the procedure design gradient consists of what OIS
|
2.5% OIS & 0.8% increasing obs clearance margin a total of 3.3% PDG
|
|
For a SID the PDG is
|
3.3%
|
|
during an Omni directional departure what height are you required to climb to before turning onto desired track
|
120m
|
|
for omni directional departures the procedure ensures that at least ___ of obstacle clearance will be provided before turns greater then
|
90metres & 15Degs
|
|
in a precision approach generally glide path intersections occurs at heights above runway elevation from
|
300m to 900m
|
|
on a non-precision approach a so called straight in approach is acceptable, if the angle between the final approach track & the runway centreline is
|
30Degs or less
|
|
following a missed approach the minimum obs clearance in the intermediate phase is
|
30m
|
|
what is the correct name for a turn from the outbound to the inbound section of an approach
|
procedure turn
|
|
minimum obs clearance within the primary area of an intial & intermediate approach segment
|
300m & 150m
|
|
the minimum Obs clearance in the final phase of a MAP
|
50m
|
|
a dead reckoning segmant from a fix to the localizer will intersect the localizer by
|
45ºand will not be more then 10nm in length
|
|
a procedural turn of 45º by a Cat A/B AC will last
|
1min
|
|
minimum MAP gradient
|
2.5%
|
|
Cat 1 precision app minimum DH
|
200Ft
|
|
in precision App. obs clearance assumes the pilot does not normally deviate from centre line by more then
|
half a scale deflection
|
|
maximum descent gradient
|
6.5%
|
|
where does the intermediate MAP segment end
|
at the point when 50m Obs clearance is obtained
|