Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
8 Cards in this Set
- Front
- Back
How often should the tensioning system be inspected for serviceability and sercurity
|
A minimum of three times a day and after each arrestment
|
|
What may result if there is too much tension on the tension system
|
Premature shear pin failure when aircraft rolls over the cables
|
|
What type of anchor chain is not desirable
|
Wrought-iron chain
|
|
How many feet is a shot of chain
|
90 feet
|
|
Who is the approving the approving to propose improvements to or relocate existing arresting gear
|
Navair system command
|
|
What is the function of the e- 28 emergency runway arresting gear
|
It is used as a land-based emergency standby gear for arresting hook equipped aircraft
|
|
In the E-28 emergency runway you arresting gear, how often is the Kinetic energy of the arresting aircraft absorbed during runout
|
By the rotary hydrodynamic arresting engines
|
|
During arrestmeant how many pounds of tape tension are required to release the cam release mechanism on the E28 arresting gear
|
6,000-6,5000
|