Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
10 Cards in this Set
- Front
- Back
Q2 B. Low carbon filler rod |
When fusion welding mild steel, you should use |
|
A. Welding rod B. Minimum as welded tensil strength of 60 000 psi |
Using the AWS classification system, describe the r60 rod. |
|
All positions |
In what positions can you use the r60 filler rod |
|
What is the melting point of the following filler metals |
A 607 B 632 C 641 D 807 |
|
Brass is an alloy of mainly copper and ? |
B Zink |
|
Braze welding tends to produce less residual stress and distortion |
True |
|
Silver brazing alloys are suitable for high impact service |
False |
|
It is advisable to match the filler metal to the parent metal whenever possible |
True |
|
List three reasons for using flux |
Any of the three are true Prevent oxidizing Remove existing oxide Act as a lubrication to assist metal flow |
|
Explain why there is no universal use for oxy-fuel welding |
Fluxes that are suitable for low temperature will not withstand high heats, and do not become fluid at low enough temperature for metals with low melt temperature |