Use LEFT and RIGHT arrow keys to navigate between flashcards;
Use UP and DOWN arrow keys to flip the card;
H to show hint;
A reads text to speech;
66 Cards in this Set
- Front
- Back
What must happen when maintenance is not accomplished? |
A check note entry is annotated |
|
A listing of warnings and references which direct attention to possible hazards to personnel which could result in death or injury while doing maintenance are known? |
Safety Precautions |
|
What is considered LOST checks? |
Daily and Situational checks not accomplished |
|
How many parts are there in the Tag Out Log? |
6 |
|
What is the primary source data for Maintenance scheduling software? |
Navy PMS CD/DVD |
|
Who serves as the overall 3-M Program technical expert and advisor? |
3MC |
|
What does the acronym NMR mean? |
No Maintenance Required |
|
What must happen when maintenance is not accomplished? |
A check note entry is annotated |
|
What type of tag would be used as a precautionary mensure to provide temporary instruction or to indicate that action be exercised to operate equipment? |
Caution |
|
Schedule, Review and Forecast does what for the maintenance person? |
Saves him time and energy. Help him manage his maintenance |
|
Who has overall responsibility for ensuring ship maintenance is accomplished in accordance with 3M procedures and the 3M system functions effectively? |
Commanding officer |
|
who reviews, and approves via signature the Weekly PMS (3 Week Report) Schedule? |
Division Officer, wcs and LPO |
|
The LOEP contains all of the following except? |
The periodicity code for each maintenance received |
|
which of the following is NOT an example of an IEM maintenance code? |
U -1 |
|
Equipment is placed in IEM Status I (one) whenever |
The equipment will not be operated for7 days or more but fully operational |
|
Which document provides instructions and references required for use in the 3-M System? |
OPNAVINST 4710.4 |
|
If a question exists regarding a step on a maintenance requirement card (MRC), the maintenance person should......... |
Immediately Contact the Work Center Supervisor |
|
What is OPNAVINST 5100.19 Series? |
NAVOSH Program Manual for Forced Afloat |
|
How often should PMS check 6641/1005 M-9R be accomplished? |
Once a month or as required |
|
Equipment should be placed in IEM Status II when...... ... ... |
The equipment is inactive and directly subject to corrective maintenance, overhaul, or removal for safe storage or is temporarily transferred to another activity for 7 days or longer |
|
If an MRC has a SYSCOM CONTROL NO of 11 BWQD Y, what does the Y indicate? |
Repair Parts are required |
|
What does a "C" to the Left a MIP on the LOEP indicate? |
Changed MIP |
|
A periodically of M-1 signifies what? |
M-1 has mandatory related maintenance of R-1 |
|
S 24 DWYG N From this(pink) MRC SYSCOM CONTROL Number you know that the MRC is.............. |
Classified Secret |
|
When a maintenance action(M-1) cannot be accomplished within periodicity, what must be submitted and/or acknowledged reflecting the non- accomplished maintenance? |
Check Note and PMS Alert |
|
In OMMS-NG, a Job Sequence Number is created by? |
Creating/ submitting a work candidate |
|
When entering a work candidate, formerly a 2- kilo, in OnanMS-NG, what minimum information is required? |
Item blocks with a red check by them on each Tab of a work candidate |
|
If multiple maintenance persons are assigned to a single maintenance action, who must update the PMS Schedule and annotate and sign the 13 Week Report? |
The Senior Most Person Assigned |
|
A Work Center Supervisor can lend OMMS-NG permissions to someone else without giving them their LAN Password. True or False? |
True |
|
To check status of parts ordered for your work center you should |
Open your work candidate and check the status on the parts tab |
|
When submitting a 2k in OMMS - NG that is assigned a priority of highly desirable Essential or Mandatory where should the CASREP and serial be documented? |
On the MISC tab |
|
What Symbol indicates mandatory related maintenance is required and must be accomplished concurrently for the MR to be 100% Complete? |
# |
|
what does the acronym IEM stand for? |
Inactive Equipment Maintenance |
|
PMS schedules are produced using what computer program? |
SKED 3.2 |
|
For a Danger/ Caution tag when does the second person check the tags? |
After the first person hangs the tugs and hands the TORS to the second person to find, check breaker/ valve position and signs the tags |
|
What does DLR stand for? |
Depot Level Repairable |
|
The RPPO is responsible for maintaining a work center RPPO log. True or False? |
True |
|
What is Deferred Maintenance? |
Work that need to be done |
|
What is the maximum periodicity range of a 2W MRC? |
9 to 19 days |
|
What is the maximum periodicity date range of a 3W MRC? |
14 to 28 days |
|
What is the maximum periodicity range of a weekly(W) MRC? |
None |
|
What does the WORD CASREP stand for? |
Casualty Report |
|
What program onboard is used for HAZMAT Identification? |
HMIS |
|
The SPMIG in SKED provide NSN/NIIN numbers for items required by PMS. True or False? |
True |
|
What is the basic rule when signing receipts? |
Circle, Sign and Date |
|
What does MSDS stand for? |
Material Safety Data Sheet |
|
That is GDAPL? |
Global Distribution Allowance |
|
A sub category code used to identify test equipment used in the performance of PMS is... ... ... |
A Scat Code |
|
The LOEP contains all except which of the following? |
Tools Required |
|
The following are responsibilities of the Maintenance Person except............... ... |
Ensure the Status of work center planned Maintenance is correctly reflected on the PMS Schedules in SKED |
|
The only modifications which shipboard personnel may NOT make to MRCs are......... |
WCS may line out any items in the procedure block |
|
What information goes in the Work Candidate Summary Block in OMMMS-NG? |
A brief description of the problem |
|
What are the 5 steps to ORM? |
Identify Hazards Access Hazards Make Risk Decisions Supervise |
|
which of the following contains the planned maintenance requirements for a particular work center? |
Work Center PMS Manual |
|
When is Asbestos considered a health hazard? |
When it is inhaled |
|
What does the acronym TORS stand for? |
Tag out record sheet |
|
During the Tag Out procedure, proper component identification ( ie valve label) is required. True or False? |
True |
|
The Concept of ORM includes which of the following |
A decision making tool used by people at all levels to increase operational effectiveness by anticipating hazards and reducing the risk for loss |
|
Who approves a Force revision. Also approves IEM? |
Department Head |
|
What are the responsibilities of the person attaching the Tag? |
1. Verify the breaker/valve is in the proper Tag out position. 2. Verify Danger/ caution Tag matches equipment 3. Properly hang Tag |
|
What is the correct for a line item in ESOMS? |
WC- 00[Type] DESCRIPTOR |
|
What do you do when you find a damaged Tag? |
Notify the Authorizing officer |
|
which of the following is a non- calendar periodicity code? |
U-1 |
|
which of the following provides detailed procedures for performing maintenance and describes who, what, where, how and with what resources a specific requirement will be accomplished? |
Maintenance Requirement card |
|
who maintains the 13 Week Report (Accountability log)? |
Work Center Supervisor- wCS |
|
Who is the principal assistant to the XO in 3M matters? |
3M Officer |